Setup guide

114 | Quick Start: Setting up MFP devices to work with Send to eCopy
Enabling file storage in network folders
Use the following procedure to enable file storage in network folders on GL controllers.
To enable file storage in network folders on GL controllers:
1 Click the Administration tab and then select Setup.
2 Select Fax/Scan Agents.
3 Select Send to File.
4 Make sure the following settings are selected:
5 Save the information.
Scanning documents
Use the following procedure to scan documents using the scan template.
To scan documents using the scan template:
1 Load your originals into the MFP.
2 Press the Printer/Network button on the control panel.
3 Press the Scan button on the touch screen.
4 Select Private next the bottom edge of the touch screen.
5 Press the name of the template group, such as “eCopy”.
6 Press the name of the template you want to use.
7 Select Scan.
Option Description/Setting
Storage Path Select Send scanned documents directly to the storage path.
Remote 1 Select Allow user to select network folder to be used as a destination.