Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 109
7 Save the information.
8 Click Log Out.
Creating a scan template group
Use the following procedure to create a scan template group on the MFP.
To create a scan template group:
1 Select the Registration tab.
2 Select a template group that is “Undefined”, such as “001”.
3 Enter a name for the group, such as “eCopy ScanStation”.
4 Save the information.
Creating and configuring scan templates
This section specifies only the required settings. You can specify other settings to make each
template unique. Examples of templates that you might want to create are:
■ 1-sided (Auto Color and Auto paper size)
■ 2-sided (Auto Color and Auto paper size)
To create and configure scan templates:
1 Select the “eCopy ScanStation” template group.
2 Select an “undefined” template.
3 Select the Scan and Save as file options and then click Select Agent.
4 Select Panel Setting, specify the following settings, and then click Save.
5 Click Save as file Setting, specify the following settings, and then click Save.
Option Description/Setting
Caption1 and Caption2 Information that describes the specific settings.
Automatic Start Enable. (Available only with e-Bridge version 3.0.0 and later.)
Option Description/Setting
File Format TIFF-S (single-page TIFF).
Use local folder Clear this option.
Remote 1 Select this option (required).