Setup guide

106 | Quick Start: Setting up MFP devices to work with Send to eCopy
5 Under New Destination, click FTP.
6 Under FTP Destination Control, make sure that you specify the information that Send to
eCopy requires (see Table 4) in addition to any information that the MFP requires.
7 Click Submit.
When the system displays the “Your request was successfully processed” message, the
profile is available at the MFP
.
Note: To use this profile with Send to eCopy, you must enter user name, password, and directory
information, even though the screen indicates that the fields are optional.
TABLE 4. Sharp MFP: FTP Destination Control settings
Field Description
Hostname or IP Address The address of the FTP site, such as, 10.10.12.110.
User Name The name of the FTP user created to access the FTP site, such a, “FTPeCopy”.
Password The password of the FTP user.
Directory The path to the target FTP folder created for temporary storage of the scanned
image documents, such as “\scans” or “\scans\HR”.