Setup guide

102 | Quick Start: Setting up MFP devices to work with Send to eCopy
Scanning documents
You scan documents to the shared network folder that you created for use with Send to eCopy.
To scan documents:
1 Load your originals into the MFP.
2 Press the Scan button on the control panel.
3 On the Program tab, select the program you registered, such as “eCopy Scans”.
4 Press the Start button on the control panel to start scanning.
TABLE 3. Konica Minolta MFP: Settings required for eCopy
Field Description
No. The registration number. This number identifies the program on the Program tab at the
MFP.
Name The registration name, such as “eCopy Scans”.
Destination
Information
The destination that you registered in step 3. (To specify the destinaton, select the Select
from Address Book option, click the icon next to the field, select the destination.)