Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 101
5 To register the program:
■ In the navigation pane, click Program.
The Program List page opens.
■ Click New Registration.
The New Registration page opens.
■ Select SMB and then click Next.
The Program (SMB) page opens. For Send to eCopy, you must at least specify the
settings required for eCopy (see Table 3). However, you can specify any other scan
settings that you want the program to use.
■ Click Apply.
■ When the “Program registration is complete” message appears, click OK.
The program appears in the Program List.
TABLE 2. Konica Minolta MFP: Address Book SMB settings
Field Description
Name The destination name.
Index The index tab on which you want the destination to appear.
Host Address The IP address of the ScanStation where you created the SMB folder.
File Path The path to the SMB folder.
User ID The ID used to log on to the ScanStation.
Password The password used to log on to the ScanStation.