Setup guide

eCopy ShareScan
®
Installation and Setup Guide | 97
Creating a network shared folder
eCopy recommends that you create a network shared folder on the ScanStation before you
configure the MFP.
Since the MFP requires write access to the network shared folder, make sure that you assign
appropriate permissions to the folder.
eCopy recommends that you name the folder “Toshiba_drop”.
To make sure that the folder can be accessed, go to a different computer on the network and try
to create a folder in the shared folder. Then try to copy a text file into it. If the system displays any
error messages, check the permissions on the shared folder.