Setup guide

96 | Quick Start: Setting up MFP devices to use with Send to eCopy
Setup tasks
Before setting up an MFP that you plan to use with Send to eCopy, make sure that you install
eCopy
™
ShareScan and then license the product using a Send to eCopy key, as described earlier in
this guide.
You must then perform the following tasks:
■ Create a network shared folder on the ScanStation to temporarily store the scanned image
files.
■ For some MFPs, create an FTP folder to temporarily store the scanned image files.
■ Configure the MFP.
■ Create a profile to use with Send to eCopy.
■ Configure the ScanStation Client to use Send to eCopy.
■ Create connector profiles and activate them on the ScanStation that you are using with
Send to eCopy.