User Manual
- 11 -
EN
Compatibility of the progressive scan TVs
Some progressive scan TVs are not fully compatible with the player, which may cause image distortion. In this case,
switch Video output mode from “PROGRESSIVE” to “VIDEO”, “Y/PB/PR” or “RGB”.
Component Video & Audio Output Connectors
• If you have a high-definition or “digital ready” TV, you may take advantage of the player’s Progressive Scan and YPBPR
(YUV) output for the highest video resolution possible.
• If your TV does not accept the Progressive Scan or YPBPR (YUV) format, the picture will appear scrambled when you
try Progressive Scan or YPBPR (YUV) output on the player.
1. Connect the COMPONENT OUT connectors on the player to the corresponding input connectors on the TV, using a
component video cable.
2. Connect the L-R AUDIO OUT connectors of the player to the audio Left - Right input connectors on the TV using the
audio cable.
Y Pb Pr
COMPONENT VIDEO INPUT
LEFT RIGHT
AUDIO INPUT
Audio cable
(commercially available)
Component video cable
(commercially available)
TV
DV-SV92S(RU)_Russian_english.indd11 1/24/20063:53:35PM