Specifications

DV-SL1500W

Setup menu Selectable parameters (* indicates default settings.) Description

AUDIO SETUP

DIGITAL OUT RAW*

PCM

Preparation for Use

Changing the system setup (continued)

I Highlight the AUDIO OUT option, and press the 1, 2, 5 or 4

buttons to choose the audio output mode you prefer. Press ENTER

to confirm.

I RAW: Choose this setting if your DVD player is connected to a

power amplifier with a coaxial cable; When playing a disc recorded

with Dolby Digital, DTS and MPEG audio formats, the

corresponding digital signals will be output from the Coaxial Output

socket. This Player’s digital output sockets are designed for a

connection to a Dolby Digital, DTS, or MPEG receiver or decoder.

I PCM: Choose this setting if your DVD player is connected to a 2-

channel digital stereo amplifier; When playing a disc recorded with

Dolby Digital and MPEG audio formats, audio signals will be

modulated into 2-Channel PCM signal, and it will be output from

the Coaxial Output socket.

DYNAMIC RANGE FULL

6/8

4/8

2/8

OFF*

* Use the 5∞ buttons to adjust the setting level and press the “ENTER” to complete it.

DYNAMIC RANGE:

If adjusting to FULL, the audio signal peak value will be the

minimum; whilst adjusting to OFF, maximum.

DV-SL800W 17-24 1/26/06, 6:24 PM23

Downloaded from www.Manualslib.com manuals search engine

Downloaded From DvDPlayer-Manual.com Sharp Manuals