E57B7QD.QX3 03.5.29 4:12 PM Page 1 DVD Video Player MODEL DV-SL10(EM) OPERATION MANUAL DVD / CD / VIDEO CD PLAYER OPERATE OPEN/CLOSE PLAY STOP SKIP REW FWD The region number for this DVD player is 2. 2 NTSC/PAL Please read this Operation Manual carefully before using your DVD Video player.
E57B7QD.QX3 03.5.29 4:12 PM Page 2 SAFETY INFORMATION Note: WARNING: This Player can be used only where the power supply is AC 110V-240V, 50/60Hz. It cannot be used elsewhere. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
E57B7QD.QX3 03.5.29 4:12 PM Page 3 SAFETY INFORMATION Location and Handling Service • Do not attempt to service this Player yourself. Please refer any service to the nearest service centre approved by SHARP. • • • • Do not cover or place the Player in enclosed spaces to prevent excessive temperature build up. Do not place the Player in direct sunlight, or near heat sources. Keep the Player away from strong magnetic objects. Do not place any object containing water or other liquids on the Player.
E57B7QD.QX3 03.5.29 4:12 PM Page 4 FEATURES ¡Dolby Digital sound ¡On-screen display This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.
E57B7QD.QX3 03.5.29 4:12 PM Page 5 TABLE OF CONTENTS ■ SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . 2 ■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ■ INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . .
E57B7QD.QX3 03.5.29 4:12 PM Page 6 ABOUT THE DISCS Playable Discs The following discs can be played back on this DVD player. ¡DVD video ¡DVD-R/RW* ¡Audio CD ¡CD-R/RW* ¡MP3* ¡Video CD *Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/RW, or CD-R/RW discs made on personal computers, or on DVD recorders may not be played back properly due to the factors such as scratches, dirt or special properties of the disc.
E57B7QD.QX3 03.5.29 4:12 PM Page 7 FUNCTIONAL OVERVIEW 1 FRONT PANEL 2 3 4 5 6 7 8 9 OPERATE OPEN/CLOSE PLAY STOP SKIP REV FWD REAR VIEW DIGITAL L Y R VIDEO AUDIO OUT 10 11 12 13 CR COMPONENT CB S-VIDEO VIDEO OUT 14 15 1. OPERATE to switch the player to ON or OFF 2. OPEN/CLOSE to open/close the disc tray 3. PLAY to start or resume disc playback 4. STOP to stop playback 5. SKIP H / REVh goes to previous chapter or track during playback; press and hold for 1.
E57B7QD.QX3 03.5.29 4:12 PM Page 8 FUNCTIONAL OVERVIEW Display Stays on when repeat chapter function is on. Stays on when repeat track function is on. Stays on when repeat title function is on. Stays on when the repeat function is on. Lights up when a DVD is inserted on the tray. Stays on when the A-B repeat function is on. Stays on when the inserted disc is being played back. Lights up when the inserted disc comes to a pause. Lights up when a playback control is activated.
E57B7QD.QX3 03.5.29 4:12 PM Page 9 SETTING UP YOUR DVD PLAYER CAUTION: • • • • • Be sure to turn off the Player and equipment to be connected before connecting. Read through the operation manual for the equipment to be connected. Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.
E57B7QD.QX3 03.5.29 4:12 PM Page 10 SETTING UP YOUR DVD PLAYER Connecting a TV Equipped with S-VIDEO Input or VIDEO/AUDIO Input Jacks The S-VIDEO connection provides a better quality video signal than the VIDEO (COMPOSITE) output. Use a commercially available S-VIDEO cable to connect from the Player to the TV.
E57B7QD.QX3 03.5.29 4:12 PM Page 11 SETTING UP YOUR DVD PLAYER C Digital audio connection You can make this connection using a coaxial digital cable.
E57B7QD.QX3 03.5.29 4:12 PM Page 12 PLAYING A DISC Basic Playback DVD General Features CD DVD-RW Getting started • • • VCD VR mode Turn on the power of the TV, amplifier and any other components which are connected to the DVD. Make sure the TV and audio receiver (commercially available) are set to the correct channel. When you play NTSC recorded discs the default setting converts this to a modified PAL (see page 20 “Display Settings”). 1 Press OPERATE.
E57B7QD.QX3 03.5.29 4:12 PM Page 13 PLAYING A DISC Title Menu Resume / Stop DVD DVD CD VCD DVD-RW VR mode 1 Press TITLE. • The title menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 Press Arrow ( L / K / B / s ) to select an item, and ENTER to confirm selection. • Playback will begin at the selected Title. 1 During playback, press STOP. • Resume message will appear on the TV screen.
E57B7QD.QX3 03.5.29 4:12 PM Page 14 PLAYING A DISC Fast Forward / Reverse Search DVD CD MP3 DVD-RW Zoom VCD DVD VR mode DVD-RW VCD VR mode 1 During playback, press FWDg or REVh repeated- ly to select the required forward or reverse speed: x2, x8, x50, x100. • If you are using FWD g or REVh on the front panel, press and hold it for more than 1.5 sec (the longer you hold it, the faster the speed will be).
E57B7QD.QX3 03.5.29 4:12 PM Page 15 PLAYING A DISC Title / Chapter Search Repeat DVD • REPEAT are available only during playback. DVD-RW VR mode REPEAT TITLE / CHAPTER 1 Press DIRECT SKIP once for the Chapter search, twice for the Title search during playback. DVD DVD-RW VR mode /2 To activate the repeat function, press REPEAT during playback. • The repeat mode changes as described below every time you press the button. 2 Enter the desired chapter/title number using the numerical key pad.
E57B7QD.QX3 03.5.29 4:12 PM Page 16 PLAYING A DISC Programme MP3 Playback MP3 CD When a CD with MP3 files is inserted in the DVD player, the MP3 menu will appear on the TV screen, and number of tracks is displayed on the front panel. 1 In stop mode, press K or L to select the desired You may determine the order in which tracks will play. 1 Press MODE (playback must first be stopped). • The PROGRAM screen will appear. 2 Press ▲ or ▼ to select a group or track.
E57B7QD.QX3 03.5.29 4:12 PM Page 17 PLAYING A DISC Track Selection Stereo Sound Mode MP3 1 Press DIRECT SKIP during playback. • The FILE LIST will appear. 2 Select a desired track using Arrow (L/K/B/s). • Press B when you want to go to the next hierarchy. • Press s when you want to go back to the previous hierarchy. 3 Press PLAY to start playing VCD 1 Press AUDIO repeatedly during playback to select between STEREO, L-CH or R-CH.
E57B7QD.QX3 03.5.29 4:12 PM Page 18 PLAYING A DISC Changing the On-Screen Display DVD Marker Setup Screen DVD-RW DVD CD VR mode You can check information about the current disc by pressing ONSCREEN on the remote control. 1 Press ONSCREEN during playback to show current Chapter. 9/49 0:00:00 -0:00:00 • The elapsed and remaining playing time of the current chapter will be displayed. 2 Press ONSCREEN again to show current Title.
E57B7QD.QX3 03.5.29 4:12 PM Page 19 DVD SETUP Audio Setting Parental Control Choose the appropriate settings for best sound reproduction dependent on your externally connected equipment. These settings only affect DVD audio playback. 1 Press SETUP in STOP mode. 2 Press B to select (CUSTOM), then press ENTER. • On screen menu will appear. 3 Press B to select (AUDIO), then ENTER to confirm. 4 Press K or L to select the below items, then press ENTER.
You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD player. Press SETUP in STOP mode. Press B to select (CUSTOM), then press ENTER. • On screen menu will appear. Press B to select (DISPLAY), then ENTER to confirm. 4 Press K or L to select the below items, then press ENTER. TV ASPECT : • Press K or L for an item selection, then press ENTER. • Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen.
