Specifications

9
Input : Select the input video signal
HD/SD SDI 1
HD/SD SDI 2***
VGA
#
DVI
HD Component
Composite 1
Composite 2***
S-Video
SD Component
# : Press “-“ key to activate the “Auto Picture Setup” function.
PIP Setup4
PIP Source 4
HD/SD SDI 1 / HD/SD SDI 2 / VGA / DVI / HD Component / Composite 1 / Composite 2 /
S-Video / SD Component / Off
PIP Size : OFF / Small / Medium / Large / PBP
4 possible input groups that can be mixed for PIP :
a) VGA/HD-component
b) DVI
c) HD-SDI
d) Composite/S-Video/SD-component
It can not allow to select signal source from the same group for PIP.
PIP Position :
PIP Swap : Swap between the main window and PIP window
PIP Auto off :
: OFF / ON
ON : When PIP is no signal input after 30 seconds, the PIP
window will turn off automatically.
OFF : PIP window keeps on
*** DISPLAY WHEN SETTING ON UNDER SETUP Æ AUTO SOURCE SEEK
Utilities :
Setup 4
Auto Picture Setup
#
: Auto adjust the image position, phase and size
Auto Color Gain
##
: Auto Color Calibration (See appendix IV)
Wide Screen Mode detection
#
4 : Recognize the wide screen mode coming from ARGB port
- Off
- 1280x768
- 1366x768
Manual Clock
##
: Adjust the image horizontal size
Manual Phase
#
: Fine tune the data sampling position (adjust image
quality)
Auto Source Seek :
- Auto : : OFF / ON
ON – Auto source select always enable
OFF – Disable auto source select function
- Setup4 Selection for the corresponding input sources detection
HD/SD SDI 1
HD/SD SDI 2
VGA
DVI
HD Component
Composite 1
Composite 2
Move the PIP position upward
Move the PIP position downward
Move the PIP position to the left
Move the PIP position to the right