Specifications

2
Introduction
Design for LCD monitor and other flat panel display applications, the SVH-1920 controller provides easy to use
interface controller for :
¾ TFT (active matrix) LCD panels of 1920x1200, 1920x1080, 1600x1200, 1680x1050, 1440x900, 1366x768, 1280x1024,
1280x800, 1280x768 1024x768, 800x600, 800x480 and 640x480 resolutions.
¾ Computer video signals of VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA standard.
¾ Video signals of NTSC, PAL and SECAM standard.
¾ DVI input support up to 1920x1200 60Hz input signals
¾ Support HD component input (480p, 720p, 1035i, 1080i, 1080p)
¾ HD-SDI input support by using optional HD-SDI adaptor board (Kit P/N 546013410-3 / P/N 546013310-3 )
HOW TO PROCEED
¾ Ensure you have all parts & that they are correct, refer to:
• Connection diagram (separate document for each panel)
• Connector reference (in following section)
• Assembly notes
¾ Check controller switch & jumper settings (errors may damage the panel)
¾ Prepare the PC
¾ Connect the parts
¾ Understand the operation & functions
IMPORTANT USAGE NOTE
This equipment is for use by developers and integrators, the manufacturer accepts no liability for damage or injury
caused by the use of this product. It is the responsibility of the developer, integrators or other user of this product to:
• Ensure that all necessary and appropriate safety measures are taken.
• Obtain suitable regulatory approvals as may be required.
• Check power settings to all component parts before connection.
DISCLAIMER
There is no implied or expressed warranty regarding this material.