Operating instructions

EN 53
LOCATE EDIT-OUT POINT
6
Press PLAY to start
playback. Find the point
where you want the edited
scene to end, then press
PAUSE.
Then, press IN/OUT. The
edit-out point appears on
the screen.
USE FADE/WIPE EFFECT ON
SCENE TRANSITION
(IF NECESSARY)
7
Press FADE/WIPE.
● Cycle through the effects
by pressing repeatedly,
and stop when the one
you want is displayed.
● If you select a Fade/
Wipe effect for an Edit-
Out point, the effect is
automatically applied to the following Edit-In point.
● You can't use a Picture Wipe/Dissolve at the end of
the last scene.
● When you use Fade/Wipe effects, that time is
included in the total time (this does not apply to
Picture Wipe/Dissolve).
USE PLAYBACK EFFECT
(IF NECESSARY)
8
Press EFFECT.
● Cycle through the effects
by pressing repeatedly,
and stop when the one
you want is displayed.
● You can use Classic
Film, Monotone, Sepia,
Strobe or Video Echo
effects. (Z pg. 32)
● You can also select
– – – –
so that the date and time
are displayed.
REGISTER ADDITIONAL SCENES
9
Repeat steps 5 – 8.
● To change previously registered points, press
CANCEL. The registered points disappear, one at a
time, from the most recently registered point.
● If you're not using Fade/Wipe or Playback Effects,
repeat steps 5 and 6 only.
P1 IN OUT MODE
1 – – 0 : 3 1 : 0 2
→ 0 : 5 4 : 0 0 – – – –
2 – – – : – – : – – →
3 →
4 →
5 →
6 →
7 →
8 →
TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8
P1 IN OUT MODE
1
W H
0 : 3 1 : 0 2 → 0 : 5 4 : 0 0
P
- -
2
P
– : – – : – – →
3 →
4 →
5 →
6 →
7 →
8 →
TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8
P1 IN OUT MODE
1
W H
0 : 3 1 : 0 2 → 0 : 5 4 : 0 0
P
2
P
– : – – : – – →
3 →
4 →
5 →
6 →
7 →
8 →
TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8
123
456
7
89
0
2
4
1
3
T W
DV VHS
PLAY
PAUSE
EFFECT
IN/OUT
R.A. EDIT
FADE/WIPE
CANCEL