User Manual

36 EN
Recording
Satellite Link (cont’d)
Note
• If you have not set the clock, the clock setting window will appear at step 3. Follow to step 4 in “Clock
Setting” on page 22.
• You cannot set the End time for the Satellite Link Timer Recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during Satellite Link
Timer Recording.
• When a regular Timer Recording and the Satellite Link Timer Recording are overlapped, those
recordings are recorded as illustrated below.
Example 2
Actual
Recording
Timer
Recording
Satellite Link
Example 3
Actual
Recording
Timer
Recording
Satellite Link
Example 1
Timer
Recording
Actual
Recording
Satellite Link
Settings for external equipment
Connection to external equipment
Connect the external equipment
using either the input terminals,
AV1, AV2, (Rear) or AV3 (Front).
However, for AV3 jacks, you
have to select S-INPUT or VIDEO
input jacks depending on the
connected devices.
Use a commercially available
Scart, S-Video or Video cable
and an Audio cable for this
connection.
1
In stop mode, press [SETUP].
2
Select “Required Setting”
using [Cursor K / L], then press
[ENTER].
Select Video
TV Aspect
Required Setting
4:3 Letter Box
Video In
DVDVCR
3
Select “Select Video” using
[Cursor K / L], then press
[ENTER].
Select Video - AV3
(
Front
)
S-Video In
Video In
DVDVCR
4
Select the input jack type to be
used using [Cursor K / L], then
press [ENTER].
• If you want to use VIDEO input
jack (Composite), select “Video
In”.
• If you want to use S-INPUT jack,
select “S-Video In”.
5
Press [SETUP] to exit.
1 2 3
6
54
7
0
8 9
AUDIOREPEAT
PAU S E
SEARCH
SLOW
MENU LISTTOP MENU
STOP
PLAY
FWD
REV
SKIP
PROG.
CLEAR/C-RESET
VCR
REC/OTR
DVD
REC/OTR
PQRS TUV WXYZ
GHI JKL MNO
.@/: ABC DEF
SPACE DISPLAY
ENTER
ZOOM
REC MODE
VCR
RAPID PLAY
DVD
CM SKIP
SETUP
T-SET
OPEN/CLOSE
EJECT
TIMER PROG.
DUBBING
VCR/DVD RECORDER
COMBINATION
NB203ED
RETURN
OPERATE
1
5
2
3
4