User Manual

22 EN
Getting started
Setting the clock
Auto Clock Setting
Channel Presetting must be set
before the Auto Clock is set.
To set the clock automatically,
the channel assigned to position
04 must have the PDC signal.
1
In stop mode, press [SETUP].
2
Select “Clock” using [Cursor
K / L], then press [ENTER].
3
Select “Auto Clock Setting”
using [Cursor K / L], then press
[ENTER].
Option window will appear.
Auto Clock Setting
OFF
ON
DVDVCR
The default is “ON”.
4
Select “ON” using [Cursor
K / L], then press [ENTER].
5
Press [SETUP] to exit.
6
Press [
OPERATE] to turn off.
This unit will search for the clock
time only when the power is off.
Leave it off for several minutes
to give this unit time to set the
clock on the front display panel.
Note
• The clock cannot be set automatically if you are not receiving a channel
that carries a time signal in your area. In this case, set the clock manually.
• Once the auto clock setting is performed, the unit will correct the current
time by receiving PDC broadcasts whenever you turn off the unit.
• The unit will correct the current time automatically at 8:00, if the unit
power is turned off.
• Between 23:00~1:00, the Auto Clock function does not work even if the
unit power is turned off.
2
3
4
1
5
1 2 3
6
54
7
0
8 9
AUDIOREPEAT
PAU S E
SEARCH
SLOW
MENU LISTTOP MENU
STOP
PLAY
FWD
REV
SKIP
PROG.
CLEAR/C-RESET
VCR
REC/OTR
DVD
REC/OTR
PQRS TUV WXYZ
GHI JKL MNO
.@/: ABC DEF
SPACE DISPLAY
ENTER
ZOOM
REC MODE
VCR
RAPID PLAY
DVD
CM SKIP
SETUP
T-SET
OPEN/CLOSE
EJECT
TIMER PROG.
DUBBING
RETURN
OPERATE
6
1 2 3
6
54
7
0
8 9
AUDIOREPEAT
PAU S E
SEARCH
SLOW
MENU LISTTOP MENU
STOP
PLAY
FWD
REV
SKIP
PROG.
CLEAR/C-RESET
VCR
REC/OTR
DVD
REC/OTR
PQRS TUV WXYZ
GHI JKL MNO
.@/: ABC DEF
SPACE DISPLAY
ENTER
ZOOM
REC MODE
VCR
RAPID PLAY
DVD
CM SKIP
SETUP
T-SET
OPEN/CLOSE
EJECT
TIMER PROG.
DUBBING
RETURN
OPERATE
1
In stop mode, press [SETUP].
2
Select “Clock” using [Cursor
K / L], then press [ENTER].
3
Select “Clock Setting” using
[Cursor K / L], then press
[ENTER].
Clock Setting
-- / -- / ---- ( --- )
-- : --
DVDVCR
4
Press [ENTER] again.
Default date will appear.
Clock Setting
01 / 01 / 2006(SUN)
0 : 00
DVDVCR
5
Enter the date (day / month /
year) using [Cursor K / L].
Press [Cursor B] to move the
cursor to the next field. If you
wish to go back to the previous
field, press [Cursor {].
6
Enter the time (hour / minute)
using [Cursor K / L], then
press [ENTER].
Clock Setting
02 / 01 / 2006(MON)
12: 00
DVDVCR
The clock will start.
• Although seconds are not
displayed, they will be counted
from zero.
7
Press [SETUP] to exit.
2
3
4
5
6
1
Clock Setting
7
Note
• Your clock setting will be lost if
either there is a power failure
or the unit is unplugged for
more than 1 hour.