User Manual

19EN
Recording Disc Playback EditingBefore you start Connections Getting started
Changing the
Setup menu OthersVCR functions
Getting started
1 2 3
6
54
7
0
8 9
MENU LISTTOP MENU
STOP
PLAY
FWD
REV
SKIP
PROG.
CLEAR/C-RESET
VCR
REC/OTR
DVD
REC/OTR
PQRS TUV WXYZ
GHI JKL MNO
.@/: ABC DEF
SPACE DISPLAY
ENTER
ZOOM
REC MODE
VCR
RAPID PLAY
DVD
CM SKIP
SETUP
T-SET
OPEN/CLOSE
EJECT
TIMER PROG.
DUBBING
RETURN
OPERATE
3
1
4
Initial setting
Turn on this unit for the first time,
you need to follow these steps.
1
Press [
OPERATE].
2
Turn the TV on. Select the input
to which the unit is connected.
“Initial Setting” will automatically
appear.
3
Press [ENTER] to start Channel
Tuning.
The unit will start getting
channels available in your area.
Auto Tuning Now
P 01
4
After finished channel setting,
“Clock Setting” will appear.
Then press [ENTER].
Initial Setting
Clock Setting
5
Follow to step 4 in “Clock
Setting” on page 22.
Note
• The selection will be affected
by how you receive TV
channels in your local area.
• If the auto tuning is cancelled
during scanning, some
channels not yet tuned may
not be received.
• Sorting of TV channels from
P01 to P06 will be performed
automatically as follows.
P01: BBC1 P02: BBC2
P03: ITV P04: CH4
P05: CH5 P06: SKY NEWS
* If you are using a satellite
receiver, turn it on and
select SKY NEWS before
commencing tuning.
• You cannot change the
channel when either VCR or
DVD is in any recording mode
(normal recording, One-touch
Timer Recording or timer
recording).
Channel setting
The unit will start storing
channels available in your area.
Auto Tuning Now
P 01
Wait for about 10 minutes to
finish channel storing.
4
Press [SETUP] to exit.
You can select only the channels
memorised in this unit by using
[PROG.
/ ].
To select a channel
You can select a channel using
[PROG.
/ ], or directly enter
the channel using [the Number
buttons] on the remote control.
To cancel auto tuning
Press [RETURN
] or [SETUP]
during scanning.
Tuning of this unit to broadcast
channels can be performed in
two ways.
Auto Tuning
Programme the tuner to scan
only the channels you can
receive in your area.
1
In stop mode, press [SETUP].
Setup menu will appear.
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting
2
Select “Channel” using [Cursor
K / L], then press [ENTER].
3
Select “Auto Tuning” using
[Cursor K / L], then press
[ENTER].
1 2 3
6
54
7
0
8 9
MENU LISTTOP MENU
SKIP
PROG.
CLEAR/C-RESET
PQRS TUV WXYZ
GHI JKL MNO
.@/: ABC DEF
SPACE DISPLAY
ENTER
ZOOM
REC MODE
VCR
RAPID PLAY
DVD
CM SKIP
SETUP
T-SET
OPEN/CLOSE
EJECT
TIMER PROG.
DUBBING
RETURN
OPERATE
1
4
3
2
4