User Manual

50
Recording a TV program
Preparation:
• Turn ON the TV and select its AV channel (this may be labelled EXT
/ AUX etc.)
• Load a recordable DVD or video tape into the unit.
• Press DVD/VCR to select the appropriate mode.
1
Press REC MODE/SPEED to select the re-
cording mode.
The recording mode will appear on the TV
monitor and change every time REC
MODE/SPEED is pressed.
Video recording modes: SP/LP
DVD recording modes: XP/SP/LP/SLP
SP is the normal recording mode for video
tapes. LP offers 2 times the recording time
as SP. For more information on DVD re-
cording modes, see page 48.
2
Press the numeric keys or CH
/ to select the channel to be
recorded.
1~9 : e.g. 5 = press “5”
10~80 : e.g. 29 = press “2” and “9” within
2 seconds.
3
Press
REC/OTR.
“
” appears on the screen for about 4
seconds and recording will start.
NOTES:
• When recording onto a DVD, it
takes some time from when you
press
REC/OTR until recording
actually starts.
Press
REC/OTR a little before
your preferred starting point.
With a video tape, recording starts
almost at the same time you press
REC/OTR.
• If the erase prevention tab of video
tapes is removed, the tape will
eject when
REC/OTR is pressed
for recording.
You can record programs you watch
on TV onto video tapes or DVDs.
00 : 00 : 00 SP
SP
DVD mode
VCR mode
CH 29
CH 29
VCR mode
DVD mode
INDEX