User Manual

GB
80
Preparing to Use DVD
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ZOOM
KARAOKE
SELECT
PROG
G-CODE
Southeast Asia model
Australia model
Hong Kong model
OPERATE
REW REC CH
TIMER REC VCR DVD
PLAY STOP
MIN MAX
ECHO
OPEN/CLOSE
VCR DVD PLAY/
×
2
MIC 1 MIC 2
MIN MAX
MIC VOLUME
STOP/ EJECT
OPERATE
DVD button
DVD
The following steps are necessary to display the DVD screen on the TV.
When connecting a TV with the DVD output
jacks
1 Turn on the TV and switch the TV channel to the external input
“VIDEO” or “AV” channel connected to DVD output jack.
2 Press OPERATE.
•
The start up screen is displayed on the TV screen.
3 Move VCR/DVD CHANGE Switch on the Remote to DVD.
• When the TV is connected to the DVD output jack, the image will be
displayed regardless of the VCR/DVD mode selected. Therefore, it is
not necessary to adjust the mode selected.
When connecting a TV with the DVD/VCR
shared output jacks
1 Turn on the TV and switch the TV channel to the external input
“VIDEO” or “AV” channel connected to DVD/VCR shared output
jack.
2 Press OPERATE.
3 Move VCR/DVD CHANGE Switch on the Remote to DVD.
4 Press VCR/DVD SELECTOR to enter the DVD mode.
•
You can also change the mode to press the DVD button on
the product.
• The DVD button on the product lights up.
• Each time VCR/DVD SELECTOR is pressed, the mode
changes between “VCR” mode and “DVD” mode.
VCR DVD
VCR DVD
DVD button
DVD
Light up
DVNC85(E)#080_086.p65 03.7.29, 5:17 PM80