User Manual

GB
42
Setting up for Playback of an NTSC Disc
• Before setting the “NTSC” (video signal system), perform the step
1 to 3 on the previous page.
1 Use ' or " to select “NTSC” and then press ENTER.
2 Use ' or " to select “NTSC” or “NTSC→PA L”.
(Example) Selecting “NTSC”
ENTER
RETURN
SELECT
ENTER
4
:
3
PS
NTSC
NTSC
NTSC→PAL
• About the NTSC settings:
NTSC: Select this setting when you have an NTSC TV
or an NTSC-compatible Multi-System TV
connected to the product.
NTSC→PAL: Select this setting when you have a PAL TV
connected to the product. This setting converts
the NTSC signal to a modified PAL signal.
• When you play back the PAL discs, either the setting of “NTSC→PA L ”
or “NTSC” can be used on a PAL TV or a Multi System TV.
• When you recording a NTSC DVD disc onto a video cassette, change
the setting to “NTSC”.
3 Press ENTER to confirm the setting.
4 If you want to exit the SETUP screen and return to the normal
screen, press RETURN.
• If you want to go on and specify other settings (PARENTAL
SETUP, AUDIO SETUP or DISC LANGUAGE), press ' or "
to display other SETUP screen without pressing RETURN.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ZOOM
KARAOKE
SELECT
SKIP SEARCH
PROG
G-CODE
Southeast Asia model
Australia model
Hong Kong model
DVD Setup
DVNC85(E)#040_042.p65 03.6.24, 9:54 AM42