Troubleshooting guide

70 www.sharp.co.uk/support
Recording From Other Equipment
Recording from Other Equipment
You can record video and audio signals from various external
sources, such as a camcorder, onto a video tape using this Unit.
For example, recording from a camcorder connected to LINE 2 IN/
DECODER on the Unit:
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
• There are many different ways of connecting external equipment to the Unit. Please refer to your equipment operation
manuals for further information.
LINE 1 (TV)
LINE 2
LINE 1 (TV)
S-VIDEO
OUTPUT
SELECTOR
RGB
VIDEO
S-VIDEO
DVD/VCR Unit back panel
L
R
LINE IN 3 VIDEO L - AUDIO - R
1 Connect your signal source (e.g.
Camcorder, Digital Camera etc.) to the
desired scart socket on the back of the
Unit using the manufacturers’
recommended cable (not supplied).
2 Ensure that the tape on which you wish to
record is inserted into the Unit.
3 Press the INPUT SELECT button on the
remote control until the VCR display
shows L2.
4 Press the RECORD button on the remote
to start recording.
OTHER POSSIBLE CONNECTIONS
• If you wish to record from a source connected to
LINE 1 IN/OUT, select L1. Press the RECORD
button on the remote to start recording.
• If you wish to record from a source connected with
audio phone leads to the sockets on the front of the
Unit, select L3. Press the RECORD button on the
remote to start recording.
DVNC65H063_070.pm6 30/8/02, 11:51 am70
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals