Troubleshooting guide
–
15
–
EN
VCR OPERATION
• During playback of the recorded tape in
Hi-Fi mode:
• Reception of stereo broadcasts:
Mode
Stereo
L
R
Normal
STEREO
LEFT
RIGHT
- None -
STEREO
LEFT
RIGHT
- None -
Display on
the TV screen
Display on
the TV screen
Mode
Stereo
L
R
Monaural
L Audio
R Audio
L Audio
L Audio
R Audio
R Audio
L+R Audio
L+R Audio
L
R
L
R
L
R
L
R
AUDIO OUTPUT
Hi Fi L Audio
Hi Fi R Audio
Hi Fi L Audio
Hi Fi L Audio
Hi Fi R Audio
Hi Fi R Audio
Normal Audio
Normal Audio
L
R
L
R
L
R
L
R
AUDIO OUTPUT
This VCR/DVD will record and playback Hi-Fi stereo sound. In
addition it has an A2 and NICAM stereo sound decoder.
This equipment will receive stereo and bilingual broadcasts
and there are several ways of recording and playing back the
sound.
Selecting the Sound Mode
You can select each mode by pressing AUDIO. Each mode is
indicated on the TV screen as following.
Hi-Fi Stereo Sound System
Recording one Programme while viewing another
You can record one programme while viewing another. To
start recording, follow steps to under “Viewing and
Recording the same Programme”. Then, set the TV to the
channel you want to watch.
To monitor the progress of your recording
Select the video channel on the TV.
Assemble Function
You can record in continuation from previous programme on
a pre-recorded tape.
Insert a pre-recorded tape. Press
PLAY to start playback.
Press STILL/PAUSE at the desired point on the tape.
Press REC/OTR. The VCR/DVD will be the Recording
Pause mode.
Press CH (
oo
/
pp
) to select the channel to be recorded .
Press REC/OTR or STILL/PAUSE. The recording will
begin.
Press STOP when recording is completed.
6
5
4
3
2
1
41
• During reception of bilingual broadcasts:
Display on
the TV screen
Mode
MAIN
SUB
MAIN
SUB
MAIN
SUB
MAIN
SUB
Main Audio
Main Audio
Sub Audio
Sub Audio
Main Audio
Sub Audio
L
R
L
R
L
R
AUDIO OUTPUT
NOTES:
• If you play non-Hi-Fi tapes, the VCR/DVD will play auto-
matically in monaural even if you select any mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
This function enables you to set the duration of a recording
simply by pressing
REC/OTR.
Follow steps to in “Viewing and Recording the
same Programme”.
Press
REC/OTR repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check remaining time during an OTR, press DIS-
PLAY.
• To change the recording length during an OTR, press
REC/OTR repeatedly until the desired length appears.
• To stop an OTR before recording is finished, press
STOP.
• To cancel the OTR but continue recording, press
REC/OTR repeatedly until I appears without the
recording length.
NOTE:
• If there is no timer recording set after an OTR, the
VCR/DVD switches to DVD mode and TIMER indicator
flashes because the VCR is still on standby for timer
recordings. Press TIMER ON/OFF on the remote con-
trol or STOP/EJECT on the VCR/DVD to cancel timer
standby, then press VCR button to use the VCR again.
If there is a timer recording set after an OTR, the
VCR/DVD switches to the DVD mode and TIMER indi-
cator lights up, indicating that the VCR/DVD is on timer
standby. Press TIMER ON/OFF on the remote control
or STOP/EJECT on the VCR/DVD to cancel timer
standby, then press VCR button to use the VCR again.
2
311
OTR (One Touch Recording)
H9745AD(EN)_v2.qx4 04.9.6 13:19 Page 15
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals