User Manual

ManualsBrandsSHARP ManualsVideo RecorderDV-NC100S(S)

–

PLAYING A DISC

You can enjoy surround sound effect over two speakers.

Press MODE repeatedly until the

Virtual Surround screen appears.

Press ENTER to set it to 1

(Natural effect), 2 (Emphasised

effect) or OFF.

Press MODE or RETURN to exit.

NOTES:

•The setting will be saved even if the VCR/DVD is

turned off.

• The setting will not be effective unless the sound mode

is set to STEREO. (for CDs or Video CDs only)

•Turn down the level or turn it “OFF” if the sound is dis-

torted.

• This function cannot be used during Rapid Play. (Refer

to page 21.)

VCDDVD-RWMP3CDDVD

Virtual Surround

Audio Setting

Choose appropriate settings for best sound reproduction

dependent on your externally connected equipment. These

settings only affect DVD playback.

Press SETUP in STOP mode.

Press s or B to select (CUS-

TOM), then press ENTER.

• On screen menu will appear.

Press s or B to select

(AUDIO), then ENTER to confirm.

Press K or L to select the items below, then press

ENTER.

DRC (Dynamic Range Control) :

• Choose ON to compress the

range of sound volume.

• The default setting is ON.

• DRC function is available only on

the discs recorded in the Dolby Digital format.

DOWN SAMPLING :

• Choose ON to set down sampling to 48kHz.

• Choose OFF when outputting in the original sound.

• The default setting is ON.

• When playing a disc with copyright protection, the

sound will be down sampled at 48kHz even if you set it

to OFF.

•DOWN SAMPLING function is available only on digital

output of a disc recorded in 96kHz, and when the unit is

connected to another source using the digital out jack.

OFF

AUDIO

DRC ON

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

DTS OFF

MPEG DPCM

DIGITAL GAMMA is a digital image quality enhancement

function that gives a richer image by brightening the darker

and more obscure portions of the image without altering the

brightness of the brighter portions thereby making the entire

VCDDVD-RWDVD

Digital Gamma Setting

VR mode

Use markers to memorise your favourite places on a disc.

Press

MARKER during playback.

• The display screen and Markers will appear on the TV

screen.

Press s or B to select a Marker (1 ~ 10), and ensure

that “- : - - : - -” appears in the display.

When it reaches the desired point, press ENTER.

• Selected number will turn to and the point will be

marked.

• The Title or Track and elapsed playing time will appear

in the TV screen.

To return to the Marker later, press MARKER during

playback and s or B to choose the desired marker (one

of the mark), then press ENTER.

NOTES:

• Opening the disc tray or turning off the power or select AC

(All Clear) at step and press ENTER will erase all

Markers.

•To clear a marker, using s or B, position the cursor on to

the marker number to be cleared and press CLEAR/C-

RESET.

•You can mark up to 10 points.

Press MARKER or RETURN to exit.

VCDDVD-RWCDDVD

Marker Setup Screen

VR mode

without PBC function

QUICK SETUP

PLAYER MENU ENGLISH

TV ASPECT

4:3 LETTER BOX

DOLBY DIGITAL BITSTREAM

DTS OFF

MPEG DPCM

image easier to see. Three digital gamma settings are avail-

able to allow for differences in the images played and in

brightness of the room.

Press

GAMMA during playback.

• The current setting appears.

Press ENTER to switch 1,2,3,OFF.

1,2,3 : Makes the dark parts brighter.

OFF : Shows the original picture as recorded.

Press GAMMA or RETURN to exit.

NOTES:

• The setting will be saved even if the VCR/DVD is

turned off.

•This function cannot be used during Rapid Play. (Refer

to page 21.)

DVD SETUP

•DOWN SAMPLING function is available only on the

discs recorded in the Dolby Digital format.

DOLBY DIGITAL :

Set to BITSTREAM when the VCR/DVD is connected to

Dolby Digital Decoder.

(BITSTREAM : Output by Dolby Digital)

(DPCM : Convert the Dolby Digital to PCM)

• The default setting is BITSTREAM.

•You can also adjust the setting from (QUICK) setup

menu.

DTS :

Set to BITSTREAM when the VCR/DVD is connected to

DTS Decoder.

(BITSTREAM : Output by DTS)

• The default setting is OFF.

•You can also adjust the setting from (QUICK setup

menu).

MPEG :

Set to BITSTREAM when the VCR/DVD is connected to

MPEG Decoder.

(BITSTREAM : Output by MPEG)

(DPCM : Convert the MPEG to PCM)

•

The default setting is DPCM.

•You can also adjust the setting from (QUICK)

setup menu.

Press

SETUP to exit.