User`s guide

BIOS Setup 81
E-EQ-MX1RG-D MX1 Reference Guide
• If the Off Timer expires the MX1 will turn itself off and all unsaved information is lost.
Insert a fully charged battery pack and press the Power button to turn the MX1 back on.
• When the Off Timer parameter is set to 0, the MX1 skips the critical suspend state and
turns off immediately – it will not use backup battery power. The currently unsaved
information is lost.
• When the main battery pack is removed and the MX1 completely drains the backup
battery, the MX1’s date and time settings are lost but all other parameters are recovered.
When a fully charged battery pack is again inserted in the MX1, the backup battery will
recharge itself using the power in the battery pack. The main battery life during the
recharge session is lessened.
Docked PM
Use the Docked PM parameter to set the power management preferences for the MX1 when it is
in a docking / charging station. Some LXE approved docking / charging stations allow RF
communications while the MX1 is in the dock.
Selecting Lights Off will turn off the display and keypad backlights.
Selecting Unchanged maintains the current power management settings.
Selecting Off disables power management settings when the MX1 is in a powered docking or
charging station.
Values: Off
Unchanged
Lights Off
Default: Off
Touch Wake
This parameter has no effect on an MX1 without a touch screen.
Power Key
Use this option to determine how the Power key will function when pressed.
When Disabled is selected and the user presses the Power key, nothing happens. The user will not
be able to place the unit in Suspend with the Power key or turn the unit off.
Note: When the Power key is disabled, the MX1 will power off only when both the Main and
Backup batteries are depleted.
When Suspend is selected, the MX1 will enter Suspend state upon a Power key press.
When No Susp is selected and the user presses the Power key, nothing will happen unless the user
holds the key down for 4 beeps. In other words, the user cannot suspend the MX1. The user can
only turn the MX1 off.
When Suspend-Off is selected, the user can both suspend and power off the MX1. If the user holds
the Power key down for less than 4 beeps, the MX1 will transition to the Suspend state. If the user
holds the Power key down for 4 beeps, the MX1 will power off.
Values: Disabled
Suspend
No Susp
Suspend-Off
Default: Susp-Off
Before leaving this screen, make sure the Power Key status is correct.