User`s guide

Display 33
E-EQ-MX1RG-D MX1 Reference Guide
Display
Figure 2-4 MX1 Display
The MX1 display is a transflective monochrome VGA LCD unit capable of supporting gray
scales.
The display measures three inches diagonally and provides .33mm dot pitch. It is a 160 x 160
pixel (20 columns by 20 rows) display area.
Two font sizes are supported. The choice between 8x8 or 8x16 is made in the BIOS Setup. Font
size selection may be overridden by a user supplied application, such as the ANSI Plus TE.
VGA graphics are supported with this display.
The display is automatically turned off when the MX1 enters the Suspend state, Critical Suspend
or the Display Timer expires (Display Timer default is 15 seconds).
Icons
Across the top of the display are icons that provide visual cues to current computer operation.
Icon When highlighted ...
CAPS
CAPS is on when upper case letters are selected. To enable or disable CAPS, press
2nd, then SHIFT, then the left arrow key.
Use the BIOS Setup to set CapsLock and/or NumLock upon bootup to either On or
Off..
2nd
The 2nd functions of the keypad are active.
Low Main Battery indicator. This indicates that the Main Battery charge is low and
the battery should be replaced.
AAA
The backup battery is charging. The backup battery provides power to the unit for a
short amount of time when the main battery has been removed or has failed.
Alpha
Numeric-Alpha keypad only. The A/# key is in Alphabetic mode. Operation in
Numeric Mode is indicated by the absence of the Alpha icon. Toggling between
Alphabetic and Numeric modes is accomplished by pressing the A/# key.