User`s guide

140 Startup Problems
MX1 Reference Guide E-EQ-MX1RG-D
Setting System Time and Date
1. If the MX1 is not already powered up, turn it on.
2. During bootup the <F2> key must be pressed to enter BIOS Setup.
3. At the BIOS Setup Main Menu, move the highlight to the Time parameter.
4. Type the desired entry and then press the <Tab> key to move from hours to minutes to
seconds. The colons are automatically added by the system.
5. Press the <DownArrow> to move to the Date parameter.
6. Type the desired entry and then press the <Tab> key to move from month to day to
year. The backslashes are automatically added by the system.
7. Press <Right Arrow> until you reach the Exit menu.
8. Select “Save and Exit” to save the changes. Press <Enter>.
If the MX1 does not automatically reboot, turn the MX1 off and then on again.