User`s guide

88 LXE BCWEDGE
MX1 Reference Guide E-EQ-MX1RG-D
LXE BCWEDGE
This DOS based utility, BCWEDGE.EXE, is installed on a batch MX1 by LXE.
This Terminate and Stay Resident (TSR) program is used to redirect input from COM1 or COM2
to the BIOS key ring buffer. This DOS based utility enables the use of a barcode scanner on a
COM port, provided power is available on that port. The software interprets data from the scanner
as keyboard data, thus it will work with DOS applications such as EDIT. It will not function on
Microsoft Windows 95 platforms.
When a terminal emulator program is started after the wedge utility has initialized, the keyboard
interrupt used by the wedge utility is trapped and used by the terminal emulator. The keyboard
interrupt needed by the wedge utility is no longer available.
Note: It is the responsibility of the application programmer to make the MX1 beep on errors,
etc., when running the wedge utility.
Parameters
Command line:
BCWEDGE c=# b=baud s=dps [opt unitname]
Example:
BCWEDGE c=1 b=9600 s=8N1 2330
Sets BCWEDGE to use COM1, 9600 baud, 8 data bits, no parity, and 1 stop bit on an MX1
platform.
The command to unload the wedge TSR is BCWEDGE -u.
Default options for BCWEDGE are: COM1, 9600 baud, 8, N, 1. Options are not case sensitive.
-h Displays BCWEDGE command line options.
-u Uninstall the TSR
c=# Communications port.
Default: COM1
Options: 1, 2
Note: The optional endcaps on an MX1 are COM1. The MX1’s IR Port is
COM2.
B=baud Sets the baud rate.
Default: 9600
Options: 9600, 19200