User manual

30 LokSoundXL User Manual V2.1 05/2002

List of all supported CVs

CVCV

namename

name

descriptiondescription

description

rangerange

range

defaultdefault

default

54 Random sound min Multiplied by 0,18432 is the time in seconds 0 - 255 20

for the shortest random sound interval.

These values represent the interval between

random sounds.

55 Random sound max Multiplied by 0,18432 is the time in seconds 0 - 255 60

for the longest interval between random sounds.

These values represent the interval between

random sounds.

Playing of random sounds is deactivated when

CV 53 and CV 54 = 0

56 Motor control Defines the Back EMF voltage, which the motor 0 - 255 145

reference should generate at maximum speed.

The higher the efficiency, the higher this value may be set.

If the locomotive does not reach maximum speed,

reduce this parameter.

If CV 56 is set to = 0 ist, the decoder measures the

track voltage and takes a fraction of this value for the

reference.

57 Load control „K“-segment of internal PI-controller 0 - 255 30

K-segment Defines the effect of load control. The higher the value,

the stronger the effect of Back EMF control

58 Load control „I“-segment of internal PI-controller 0 - 255 120

I-Segment Defines momentum of motor. The higher the momentum

of the motor (large flywheel or bigger diameter motor)

the lower this value has to be set

(see chapter 5.2.1)

60 Analogue Start voltage of motor in analogue operation 0 - 255 25

start voltage

61 Acceleration Value multiplied by 0.869 is the time from 0 - 64 8

signal track stop to maximum speed

62 Deceleration Value multiplied by 0.869 is the time from 0 - 64 4

signal track maximum speed to stop

63 sound volume 0 = low, 1 = medium, 2 = loud 0,1, 2 2