User manual

29
LokSoundXL User Manual V2.1 05/2002
List of all supported CVs
CVCV
CVCV
CV
namename
namename
name
descriptiondescription
descriptiondescription
description
rangerange
rangerange
range
defaultdefault
defaultdefault
default
48 Function Assignment of function outputs, which are 0 - 255 0
assignment F10(r) activated with function key F9 when driving backwards
Bit description value
0 sound slot 1 1
1 sound slot 2 2
2 function output AUX3 / sound slot 3 4
3 function output AUX4 / sound slot 4 8
4 function output AUX5 16
5 function output AUX6 32
6 sound slot 7 64
7 sound slot 8 128
49 Extended Activate support for brake track sections 5
configuration or switch off Back EMF control
Bit description value
0 load control activated 1
1 Märklin brake track activated 2
3 DCC Automatic Speed Step Detection activated 32
4 function key interpretation according to 64
LGB MTS System
50 Sound Min Divided by 128 this will yield the factor for 0 - 255 128
reproducing the sound at the slowest speed step.
values < 128 are slower, values > 128 are
faster than original speed
51 Sound Max Divided by 128 this will yield the factor for 0 - 255 128
reproducing the sound at the fastest speed step.
values < 128 are slower, values > 128 are
faster than original speed
52 Sound mode 1 Multiplied by 0,04608 is the time in seconds 0 - 255 steam: 90
between two chuff sounds at speed step 1 diesel: 0
value 0 deactivates steam sound electric: 0
and changes to diesel sound
value 255 indicates that period between chuffs is
controlled by a wheel sensor
53 Sound mode 2 Value defines the gradual decrease of intervals of 0 - 255 steam: 200
chuffs with increasing speed. A higher diesel: 0
value indicates a more rapid decrease, electric: 0
a lower value a slower decrease.
in diesel mode (CV 52 = 0): CV 53 = 0
If a wheel sensor is used (CV 52 = 255),
then this value specifies the number of pulses needed
to trigger on chuff.