User Manual

SPECIAL

FUNCTIONS

DVD

DVD-RW

C D

VIDEO

C D

Audio setting

A number of different methods are used to record audio onto a DVD video disc,

including multi-channels (used for voiceovers in other languages), Dolby Digital

(5.1ch), DTS, and linear PCM. Your Player provides a number of different audio

modes from which you can choose to suit the type of disc you are playing.

Use the following procedure to perform the Audio setting.

1 Press FUNCTION during playback.

• The Function control screen appears.

2 Use ' or " to select

and then press

ENTER.

3 Press ' or " to select the audio format

you want to use.

• See page 111 for details about the

types of audio format.

• When playing a DVD-RW, VIDEO CD or

Audio CD, the audio playback changes

in the following sequence:

L+R L R

4 Press ENTER to confirm the setting.

• You can exit the Function control screen by pressing FUNCTION or

RETURN.

• When you set the “PRO LOGIC” setting in “AUDIO SETUP” to “ON” (see page

51), selecting an audio format that uses “PRO LOGIC” causes “ D+PL” to

appear.

• This function can only be used for discs on which the sound has been recorded

in multiple formats.

• To play back VIDEO CDs recorded with DTS format, audio mode should be set to

“L+R”. The Digital signal cannot be output correctly if audio mode is set to “L” or “R”.

• With certain types of discs, you can change the audio using the disc menu. (See

page 96.)

• A DTS digital surround decoder is required to listen to DTS audio.

1ch

DVD

Using the Function Control

2LPCM

DVD