Owner`s manual
66
Specifications
General
Power requirements: AC 200-240 V, 50/60 Hz
Power consumption: 33W
Dimensions (W x H x D): Approx. 430 x 54 x 310 mm without foot
Net Weight (Approx.): 4.4 kg
Operating temperature: 5 °C to 35 °C
Operating humidity: 5 % to 90 %
Television system Analog: PAL/SECAM color system
Digital: DVB-T Standard Compliant
Recording (HDD Mode)
Recording format: PAL
Recordable media: HDD (HR400 : 160GB, HR450 : 250GB)
Recordable time: HDD (160/250GB, MPEG2 Recording):
Approx. 43/66 hours (XP mode),
84/129 hours (SP mode),
164/251 hours (LP mode),
233/356 (EP mode),
477/729 hours (MLP mode)
Video recording format:
Sampling frequency 27MHz
Compression format MPEG2
Audio recording format:
Sampling frequency 48kHz
Compression format Dolby Digital
Inputs
ANTENNA IN: Antenna input, 75 ohms
VIDEO IN: 1.0 Vp-p 75 ohms, sync negative,
RCA jack x 1 / SCART x 2
AUDIO IN: 2.0 Vrms more than 47 kohms, RCA jack
(L, R) x 1 / SCART x 2
USB IN: 4 pin (USB 1.1 standard)
Outputs
VIDEO OUT: 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1
COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUT (video/audio): 19 pin (HDMI standard, Type A)
ANALOG AUDIO OUT: 2.0 Vrms (1 kHz, 0 dB), 600 Ω,
RCA jack (L, R) x 1
DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 Ω, RCA jack x 1
DIGITAL OUT (OPTICAL): 3 V (p-p), Optical jack x 1
System
Laser: Semiconductor laser,
wavelength: 405nm / 650 nm
Disc system: Standard PAL/NTSC colour TV system
Frequency response: 20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
Signal-to-noise ratio: More than 100 dB
(ANALOG OUT connectors only)
Harmonic distortion: Less than 0.008%
Dynamic range: More than 95 dB
LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX
Accessories
SCART cable (1), RF cable (1), Remote control (1), Battery (2)
HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 66










