User Manual

35
Remote
Control
Remote Control
The same thing applies to
REC STOP and STOP buttons.
The Recorder
The
Recorder
=
=
=
+
+
Some operations such as "OPERATE" (turn
on/stand by), "RECORD" and "PLAY"(both HDD
and DVD) can be done by buttons both on the
Remote Control and the Recorder.
on HDD (left) side
on DVD (right) side
3
2
1
4
Preparation to Operate This Recorder
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
DVD VIDEO
VIDEO CD AUDIO CD CD-R
WMAMP3
CD-RW
WMAMP3
CD-R
JPEG
CD-RW
JPEG
Turn on the TV’s power.
Switch the TV’s input to the
AV input you used to connect
the Recorder.
Press
to turn the
Recorder on.
• TV broadcast will be displayed.
Operating HDD
Press
.
• The HDD mode indicator on the
Front Panel Display appears, and
HDD operation is enabled.
Operating DVD
Press
.
• The DVD mode indicator on the
Front Panel Display appears, and
DVD operation is enabled.
Recording and Playback
• Refer to pages 38 to 79 for details
about recording and playback.
NOTE
• When you turn on the Recorder’s power, the HDD and
DVD mode indicators will blink on the Front Panel
Display. During the blinking stage, system processing is
in progress. Wait until the blinking stops and the HDD
mode indicator turns on.
NOTE
• To operate HDD from Recorder, press the buttons on the
––HDD–– sign (left side). As for DVD, press the buttons
on the ––DVD–– sign (right side).