User Manual

108
CHANNEL SETTING
Function Setting
PRESET
• This lets you preset the channels into memory. A maximum of 84
channels can be preset.
CHANNEL
• For details, see “CHANNEL SETTING” on page 29.
FINE TUNING
• This lets you obtain sharp colour picture.
DECODER
• If there is a separate decoder connected to the L2 terminal of the
Recorder, set this function to “ON” in order to record the unscrambled
signal and/or watch it on your TV.
SKIP
• This determines whether the channel can be selected when using
CH
''
''
' /
""
""
" instead of Number buttons.
DELETE
• This lets you delete a channel from the Recorder memory.
NAME
• When your Recorder tunes in broadcast channels automatically, it
names them using the VPS/PDC information. The “NAME” function
lets you change the name of the channel.
NICAM
• This recorder can receive and record NICAM or A2 broadcasts.
NICAM broadcasts will be received when “AUTO” is selected in the
NICAM setting. Depending on the received programme, some
NICAM or A2 broadcasts may not be in stereo.
PROGRESSIVE OUT SET (PROGRESSIVE OUTPUT SETTING)
• If this is set as “YES”, conventional (interlaced scan, 625i) image is
converted into progressive scan (625p) when DVD is played back.
• Set this as “NO” if the Recorder is connected to TV which is not
compatible with progressive scan.
• Progressive output does not work unless the Recorder is connected
using a component video cable.
NOTE
• The 625 signal is the standard PAL component signal that includes
flyback and teletext data commonly used on CRT products.
• The 580 signal is the same as 625 less the flyback data. On LCD-TV’s
which support the 580 signal, the unit processes the 625 signal and
removes the flyback data making it 580.
• The 576 signal is the same as 580 less the teletext data. On Non-CRT
equipment such as projection systems that don’t have the ability to
show teletext, the unit processes the 625 signal and removes the
flyback and teletext data making it 576.
• If the operation manual for your display device lists 625, 580 and 576,
this Recorder will support the display device.
VIEW/PLAY SET
1 - 84
ON
OFF
CHXX
ON
OFF
*
1
For details, see page 29.
*
2
For details, see page 109.
*
3
When “RGB” is selected for “L1 OUT” setting, progressive output does not work (Page 111).
AUTO
OFF
PROGRESSIVE
OUT SET
*3
YES
NO
MANUAL TUNING
*1
NICAM
*2
Some progressive scan TVs are not fully compatible with the Recorder, which may cause image distortion. In this case,
switch “PROGRESSIVE OUT SET” from “YES” to “NO”.