User Manual

GB
68
4 Press SET/ENTER.
Example: Repeat playback of a title
(TITLE)
5 Press (INPUT) to return to
normal playback.
Partial Repeat Playback
(Repeat Playback of a
Specified Part)
1 Press (INPUT) during
playback.
2 Press \ / | to select “SPECIFY
THE PART”, then press SET/
ENTER.
3 Press SET/ENTER when you
reach the scene you want to start
Repeat Playback.
• The start point of the part (A) will be
memorized.
4 Press SET/ENTER when you
reach the scene you want to end
Repeat Playback.
• The end point of the part (B) will be
memorized and the Repeat Playback
for the specified part (A-B) starts.
5 Press (INPUT) to return to
normal playback.
HDD Playback
Switching Audio
You can change the audio output channel
during HDD playback.
Each time AUDIO (under the cover) is
pressed, the audio channels change.
• The way audio channels change differs
depending on the sound recorded on HDD.
See the table on page 109 for details.
NOTE
• When you play a programme recorded in
stereo or monaural, and if you are listening
to the BIT STREAM sound via the digital
output jack, you cannot select the audio
channel. Set “DGTL AUDIO OUT SET” to
“PCM” (see page 112), or if you want to
change the audio channel, listen via the
analogue output jacks.
Repeat Playback of a Title
or Chapter (Repeat Play-
back)
1 Play back the title or chapter you
want to repeat.
2 Press (INPUT).
3 Press \ / | to select the type of
Repeat Playback.
• PLAYING BACK TITLE: Repeats the
title currently playing back.
• PLAYING BACK CHAP: Repeats the
chapter currently playing back.
• SPECIFY THE PART: Repeats the
specified scene of title or chapter.
• Press RETURN to cancel without
setting the type of Repeat Playback.
SELECT REPEAT PLAYBACK TYPE.
PLAYING BACK CHAPPLAYING BACK TITLE SPECIFY THE PART
ENTER
\ | SELECT
TITLE REPEAT
SELECT REPEAT PLAYBACK TYPE.
PLAYING BACK CHAP SPECIFY THE PART PLAYING BACK TITLE
SET START POINT
NOTE
• For Partial Repeat Playback, set the start
and end points within the same title.