User Manual

GB
52
Timer Recording/The GUIDE Plus+
®
System
3 Press Red (A) to display the
S
HOWVIEW screen.
5 Press SET/ENTER to confirm.
•“ERROR” will appear if you have
entered a number that is not a correct
SHOWVIEW number. If this happens
press ERASE to delete the numbers
as required and enter the correct
SHOWVIEW number.
• Check that the menu list agrees with
the times shown in the TV listing. If it
does not, press ERASE to return to
the SHOWVIEW system menu, then enter
the correct SHOWVIEW number.
The first time that you use the SHOWVIEW
system to make a recording on each channel
preset, “PR” may be highlighted on the On-
Screen Display.
7 Press Green (B) to select
“Frequency”. With each press,
the selected option shifts (Once/
Daily/Monday to Friday/Monday
to Saturday/Weekly).
8 Press Yellow (C) to select
“Destination”. With each press,
the selected option toggles (HDD/
DVD).
9 Press | to proceed to the next
right recording tile (“Timing”).
Press Yellow (C) to select
“Timing” (select extra time to add
at the end or select VPS/PDC).
With each press, the selected
option shifts (+0/+10/+20/+30/VPS-
PDC).
• To set this to “VPS-PDC”, select
blank.
10 When you have completed
entering the timer settings, press
GUIDE to exit.
11 (When you select “D:DVD” in step
8 , ensure the recordable DVD-RW/
R is inserted into the Recorder)
Press TIMER ON/OFF to place
the Recorder in Timer Standby
mode.
• The TIMER indicator on the front of
the Recorder lights up.
• The channel cannot be changed
during Timer Standby mode. To
change the channel, set Timer
Standby to off.
6 Press | to highlight the right
recording tile of the scheduled
event. (Mode, Freq. and Dest.)
Then press Red (A) to select
“Mode” (Rec Mode). With each
press, the selected option shifts
(XP/SP/LP/EP/MN32/MN31/
......
/
MN1).
4 Press Number buttons to enter
the SHOWVIEW programming
number.
NOTE
• During the Timer Standby mode, you cannot
edit or add a timer programme. To edit or
cancel a timer programme, cancel Timer
Standby mode first.
• VPS/PDC is a signal broadcast by some TV
stations which adjusts the start and stop
time of your Recorder recording. This
ensures that if there is a change in broad-
cast time for your programme the Recorder
will still record the whole programme.
It is essential that the start time as it
appears in the TV listing is used to
programme the Recorder, as this informa-
tion is used to identify the VPS/PDC signal
corresponding to your programme.
• When two consecutive timer recordings are
set, as data is still written to the disc after
first timer recording is stopped, the first
part of the next programme may not be
recorded.
Record Schedule Mode Freq. Dest.
SP Once HDD
SP Once HDD1-Sep 16:20 17:00
P 00 1-Sep 16:51
Search My TV Info
Cancel Home
Schedule
Please enter the ShowView programming number and
press ENTER to confirm.
= ========
France 2
LP Once DVD1-Sep 18:00 19:00
France 3
Record Schedule Mode Freq. Dest.
SP Once HDD
P 00 1-Sep 16:46
Cancel
Back Home
Please enter the ShowView programming number and
press ENTER to confirm.
1 5 4 5 2 = ===
SP Once HDD1-Sep 16:20 17:00
France 2
LP Once DVD1-Sep 18:00 19:00
France 3
Search My TV InfoSchedule