Specifications
39
Timer Recording
Timer Recording with
G-CODE
®
system
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
The operation method is the same for both
HDD and DVD.
•
The G-
CODE
®
system allows you to programme
your Recorder for timer recording simply by
inputting the G-
CODE
number.
•
The
G-
CODE
numbers are listed in most
newspapers, television guides, and local
CATV listings. Simply by inputting this
G-
CODE
number, you can program your
Recorder for timer recording, eliminating the
need to input programme start time, stop
time, channel, date and other information
usually necessary for timer recording.
• Up to 16 timer programs can be stored.
(This includes Timer Program.)
Preparation to Use G-CODE system
• Check that the clock is displaying the
correct time.
• If the TIMER indicator on the front of the
Recorder is lit, press TIMER ON/OFF to
turn off the TIMER indicator and to set the
TIMER STANDBY mode to off.
1
Press G-CODE (button) to display
the “G-CODE” setting screen.
G-CODE NO.
G-CODE SYST
ONCE WEEKLY
EM
: S E L E C T 0 9
-
DA I LY
:RETURN
:INPUT
:ENTER
➞
2
Press Number buttons to enter
the G-CODE number.
• Press ERASE if you make a mistake
in the G-CODE number. Each time you
press the button, one digit will be
erased.
3
Press " , then use \ / | to select
“ONCE”, “WEEKLY” or “DAILY”.
• If you want to make additional
recordings at the same time each day
or week, select “DAILY” or “WEEKLY”
as appropriate.
4
Press SET/ENTER to confirm.
NOTE
•“ERROR” will appear if you have entered a
number that is not a correct G-
CODE
number. If this happens press ERASE to
delete the numbers as required and enter
the correct G-CODE number.
• Check that the menu list agrees with the
times shown in the TV listing. If it does not,
press ERASE to return to the G-CODE
system menu, then enter the correct G-CODE
number.
The first time that you use the G-CODE
system to make a recording on each
channel preset, “PR” may be highlighted
on the On-Screen Display.
5
Enter the channel button you want
to record using ' / " or Number
buttons.
• For Example to record a programme
on channel 8 press 0 8.
6
Press \ / | to select “START
(time)” / “STOP (time)” then use
' / " or the Number buttons to
change the time if necessary.
• When entering less than 10 hours or
minutes add a “0” before the number, for
example for 12:05 start, press 1 2 0 5.
REC . MODE
F:FINE S:SP L:
M:MANUAL
REC . MED I A
H:HDD D:DVD
: SELECT
LP E:EP
(1 32)
➞
16
:RETURN
:CHANGE
:ENTER
➞
When “M:MANUAL (1~32)” is
selected:
• Select the recording mode with
\\
\\
\/
||
||
|,
then press SET/ENTER. (The
recording mode can be selected from
32 levels.)
7
Press | to select “REC. MODE”,
then use \ / | to select the
recording mode.
DATE PR START S
25/12W
--
12:35 1
--
/
-- -- -
:
--
: SELECT
PR : PRESET
:RETURN:ENTER
--
/
-- -- -
:
--
--
/
-- -- -
:
--
1/4
TOP
-
:
-- - -
3:05 F H
-
:
-- - -
-
:
-- - -
:CHANGE
8
Press ' / " to select “REC.
MEDIA”, then use \ / | to select
the recording disc (“H:HDD” or
“D:DVD”).
DV-HR350X/300X-037-043 2004.4.8, 11:21 AM39