Specifications

GB
10
Main Unit of Your DVD Player
Colour Output Connectors (Y, PB(CB) and PR(CR)):
Some TVs and monitors are equipped with input connectors for the component colour signals (Y, P
B(CB) and PR(CR)). By
connecting these input connectors to the corresponding output connectors on the DVD player, you can enjoy higher
quality playback images.
If you are using a TV or monitor equipped with Y, P
B(CB) and PR(CR) connectors, use these connectors rather than
the VIDEO OUT or S-VIDEO OUT connector.
VIDEO output mode changeover switch for LINE1 OUT
(21-pin Euro-SCART)
• VIDEO: Position for output of Video signal
• RGB: Position for output of Video signal by RGB signal
• S-VIDEO: Position for output of S-Video out signal
Change the position according to the types (VIDEO/RGB/
S-VIDEO) of input terminals of the equipment with which
the 21-pin Euro-SCART is to be connected.
S-VIDEO OUT
• S-VIDEO signal is always output regardless of the position
of the output mode changeover switch for LINE1 OUT
(21-pin Euro-SCART).
VIDEO OUT
• VIDEO signal is always output regardless of the
position of the output mode changeover switch for
LINE1 OUT (21-pin Euro-SCART).
Rear
LINE1 OUT (21-pin Euro-SCART)
(see page 14)
OPTICAL
DIGITAL OUT
FRONT SURROUND CENTER
LINE1 OUT
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
L
R
SUB
WOOFER
Y P B
(
C
B
)
P
R
(
C
R
)
VIDEO
S-VIDEO
RGB
When the output changeover switch of LINE1 OUT (21-pin Euro-SCART) is set in “RGB” position, component colour
signals (Y, P
B(CB), PR(CR)) are not output.
AUDIO OUT
(see pages 13 – 14)
OPTICAL
DIGITAL OUT
(see page 15)
DIGITAL OUT
(see page 15)
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals