MODEL DV-760H DVD Video Player OPERATION MANUAL OPERATE SETUP OPEN/ CLOSE DIMMER DISPLAY VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE SUBTITLE ON/OFF SUBTITLE ANGLE AUDIO TITLE MENU RETURN ENTER REPEAT A B REPEAT PROGRAM OPERATE GAMMA STILL/PAUSE S.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG. Dette udstyr overholder kravene i direktiv nr.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
Contents GENERAL INFORMATION IMPORTANT SAFEGUARDS AND PRECAUTIONS .......................................... 3 Features ......................................................... 5 Accessories ................................................... 5 Types of Disc that can be played on Your DVD Player ........................................ 6 Discs recorded by PAL system, Discs recorded by NTSC system and Type of TV connection ........................................... 8 Main Unit of Your DVD Player ..........
IMPORTANT SAFEGUARDS AND PRECAUTIONS BEFORE OPERATING YOUR NEW DVD PLAYER, PLEASE READ THIS OPERATION MANUAL CAREFULLY. THE MANUAL SHOULD THEN BE STORED FOR FUTURE REFERENCE IN CASE OF OPERATING DIFFICULTIES OR FUNCTIONAL DESCRIPTIONS. Note: This unit can be used only where the power supply is AC 220V-240V, 50/60Hz. It cannot be used elsewhere. CAUTION: AS THE LASER BEAM USED IN THIS DVD PLAYER IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
IMPORTANT SAFEGUARDS AND PRECAUTIONS Power Lead Protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. • Hold the plug firmly when connecting or disconnecting the AC power lead. • Keep the AC power lead away from heating appliances. • Never put any heavy object on the AC power lead. • Do not attempt to repair or reconstruct the AC power lead in any way.
Features Plays DVD, video CD and CD (Digital Audio) discs Built-in Dolby Digital decoder supporting Dolby Pro Logic*1 decoding and Virtual Surround MPEG Audio Version 2.0 multi channel (5.1ch) DVD discs can be played back. New Digital Gamma correction and New Digital Super Picture functions Separate colour component output connectors (Y, PB(CB) and PR(CR))/RGB OUT/S-VIDEO OUT DTS*2 AUDIO DECODER (DIGITAL THEATRE SYSTEM) *1 Manufactured under license from Dolby Laboratories.
Types of Disc that can be played on Your DVD Player The unit can play back discs bearing any of the following marks: DVD [8 cm disc/12 cm disc] Video CDs [8 cm disc/12 cm disc] See See See 1 2 (see next page) 3 (see next page) See 2 (see next page) • Supports version until version 2.0. Audio CDs [8 cm disc/12 cm disc] Other CDs 1) On CD-G and CD-EXTRA discs, only the sound can be played (no images). 2) Photo CD, DVD-ROM and CD-ROM discs cannot be used.
Types of Disc that can be played on Your DVD Player 2 • The specific playback functionality for some DVD and video CD discs is determined by the disc manufacturer. Because this DVD player plays disc data in accordance with the disc manufacturer’s guidelines, some functions may not be available on some discs. Be sure to read the instructions provided with the disc. The “Prohibited” icon ø displayed during DVD player operation indicates that manufacturerimposed restrictions apply.
Discs recorded by PAL system, Discs recorded by NTSC system and Type of TV connection • The DVD player can play back discs recorded by NTSC using the modified PAL system, such as Video CD, DVD-region 2, but cannot play back discs for the use in U.S.A. (region No. 1). • Region numbers cannot be changed in this system. • This DVD player also has a built-in system converter which makes it possible to view discs (Video CD, DVDregion 2) recorded by the NTSC system using a PAL TV.
Main Unit of Your DVD Player Front 2 3 1 GAMMA OPERATE 4 5 STILL/PAUSE S.PICTURE OPEN/CLOSE MIN 6 SKIP STOP PLAY SKIP MAX PHONES LEVEL STANDBY PHONES t q ew r 09 6 STOP ( ) button (see page 29) 1 OPERATE button (see page 16) 7 SKIP Forward (à) button (see page 33) 2 GAMMA button/LED indicator (see page 50) 8 PLAY ( 3 S.
Main Unit of Your DVD Player Rear S-VIDEO OUT • S-VIDEO signal is always output regardless of the position of the output mode changeover switch for LINE1 OUT (21-pin Euro-SCART).
Remote Control Unit of Your DVD Player 1 2 3 4 OPERATE OPEN/ CLOSE 1 OPERATE button (see page 16) *2 x z ; l k j DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Remote Control Unit of Your DVD Player Using the Remote Control for TV Operation The provided remote control can operate the basic functions of your television. In addition to most Sharp televisions, other manufacturers’ televisions listed below can also be controlled by setting the remote control to the corresponding TV brand. The remote control’s default brand is “SHARP”, which enables control of most Sharp televisions.
Basic Connection • Set the power switch on the player and equipment to be connected to OFF before connecting. • Read through the Operation manual for the equipment to be connected. • Be sure that the colours of the connectors and plugs match up when connecting the lead. The connections described below are for video connection to the S-VIDEO OUT, VIDEO OUT or LINE1 OUT (21-pin Euro-SCART) connector.
Optional Audio Connection Connecting to an AV Amplifier 1 This DVD player contains a Dolby Digital, MPEG Audio 1/2 or DTS decoder. • When DVDs recorded in Dolby Digital, MPEG Audio 1/2 or DTS are played back, you can use an amplifier that is not equipped with a Dolby Digital, MPEG Audio 1/2 or DTS decoder.
Optional Audio Connection Connecting to a Decoder or an Amplifier with Dolby Digital / MPEG Audio 1/2 / DTS Processing When DVDs recorded in Dolby Digital, MPEG Audio 1/2 or DTS are played, the bit stream of Dolby Digital, MPEG Audio 1/2 or DTS is output from the DVD player’s OPTICAL DIGITAL OUT connector and DIGITAL OUT connector. When the DVD player is connected to a Dolby Digital, MPEG Audio 1/2 or DTS decoder, you can enjoy theatre-quality audio right in your home.
Turning on the TV and the DVD player 1 Turn on the TV, and select the external channel to which the DVD player is connected. 2 Turn on the DVD player by pressing the OPERATE button. When the startup screen shown at right appears on the TV screen, the preparations are complete. Turning the DVD player power to the Standby mode or to the Active mode. Startup Screen Standby mode and Active mode This DVD player has these two working modes.
Setup Before you use this DVD player, make the settings necessary to you of the following 6 settings. TV MODE SET .................... Specifies the settings for the type of TV connected and the playback format for wide-screen video material. SPEAKER ........................... Specifies the settings for the number and type of audio components and speakers connected, and for whether the DVD is connected to a TV or a stereo system. PARENTAL ..........................
Setup TV MODE SET Setting 1 On the SET UP screen, use the ' or " button in the screen cursor (_) to TV MODE SET. to move SE T UP T V MO D E S E T LB 2ch/DIGITAL PARENTA L LEVEL : 8 L OG I C OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Setup Use the \ or | button in to select NTSC or NTSC→PAL. • NTSC→PAL: Set this when you play back the NTSC discs on a PAL TV. (The NTSC signal is converted to a modified PAL signal.) NTSC: Set this when you play back the NTSC discs on a Multi System TV compatible with NTSC or on an NTSC TV. (The NTSC signal is out put without conversion.
Setup SPEAKER Setting 1 Use the ' or " button in SPEAKER. to move the screen cursor (_) to SE T UP 4:3 T V MO D E S E T 2 LB PAL SPEAKER 2ch/DIGITAL PARENTA L LEVEL : 8 P RO L OG I C OF F Press the \ or | button in once to display a schematic diagram of the current speaker setup. SE T UP T V MO D E DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Setup PARENTAL Level Setting 1 Use the ' or " button in PARENTAL. to move the screen cursor (_) to SE T UP OPERATE 4:3 T V MO D E S E T SPEAKER 2ch/DIGITAL PARENTA L LEVEL : 8 P RO L OG I C DIMMER DISPLAY OPEN/ CLOSE PAL LB SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE SUBTITLE ON/OFF SUBTITLE ANGLE AUDIO OF F OSD LANGUAGE SETUP EN TITLE MENU RETURN ENTER EN 2 Press the \ or | button in once to display the password specification and modification screen.
Setup 5 When the correct password is entered, the parental level modification screen appears. OPERATE SE T UP T V MO D E S E T LB DIMMER DISPLAY PAL OPEN/ CLOSE SPEAKER 2ch/DIGITAL SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE PARENTA L LEVEL : 8 SUBTITLE ON/OFF SUBTITLE ANGLE SE L ECT ( 4:3 LEVEL 8 : MENU RETURN ENTER LEVEL F OR A DU L T S : ENTER • Press the \ or | button in AUDIO TITLE ) ENTER : RETURN REPEAT to change the parental level.
Setup OSD (On Screen Display) LANGUAGE SETUP Setting You can select and set a language you want to use on the screen displays. For the first OSD LANGUAGE setting after purchasing your DVD player, please see page 17. 1 Use the ' or " button in to move the screen cursor (_) to OSD LANGUAGE SETUP on the SET UP screen. SE T UP T V MO D E S E T 2ch/DIGITAL PARENTA L LEVEL : 8 L OG I C DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Setup DISC MENU LANGUAGE Setting You can select and set a language you want to use for the disc menu. The disc menu language you set here will be displayed if it is recorded in a disc, but if it is not recorded , the prior language recorded in the disc will be displayed. OPERATE • Selecting a language from 7 languages on DISC MENU LANGUAGE 1 Use the ' or " button in to move the screen cursor (_) to DISC MENU LANGUAGE on the SET UP screen. DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Setup 2 3 Press the ENTER button to input a language code (two letters), for example “AF”. Use the ' or " button to select “A” as the first letter, use the \ or | button to move to the second place, then use the ' or " button to select “F”. • When “A” is selected for the first letter, only letters to the right of codes beginning with “A” can be selected as the second letter. Refer to the codes beginning with “A” on “Language Code List on Menu Screen” on page 53.
TEMPORARY PARENTAL Level Setting In addition to the PARENTAL LEVEL setting on pages 21 and 22, some DVD discs will prompt the viewer to temporarily change the parental level. In this event, the following screen appears. OPERATE DIMMER DISPLAY PARE NTAL L EVE L T EMPOR AR Y CH A NGE ? YES NO OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Display Information No Disc Indicator A NO DISC appears when the tray is closed and: 1) There is no disc in the tray. Disc Error Indicator A disc error appears when the tray is closed and: 1) The disc type is not DVD, VCD or CD. 2) The disc is not loaded correctly (upside-down, etc.).
Display Information Operation Mode Indicators The display on the TV screen switches from “AUTO” to “ON” to “OFF” and back to “AUTO” each time the DISPLAY button on the remote control is pressed. • AUTO mode — Displayed for 3 seconds when operation begins. • ON mode — Displayed continually until the operation mode is changed. • OFF mode — Not displayed.
DVD Playback Preparations • Switch on the TV set’s power, and select “VIDEO” or “AV” as the TV input. Refer to the operation manual for your TV for details. • Switch on the stereo system’s power if the DVD player has been connected to a stereo system. OPERATE OPERATE DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE SUBTITLE ON/OFF SUBTITLE ANGLE DISPLAY OPEN/ CLOSE AUDIO TITLE MENU RETURN ENTER MENU • Disc menus are recorded on some DVD discs.
DVD Playback 6 Use the cursor controls (or a number button) on the remote control to select the desired title. (Highlight the desired title number.) (Example: EN (English) is selected T I TL E ME NU in DISC MENU LANGUAGE setting on page 24 or 38.) 1 Cats 2 F i s hes OPERATE DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
DVD Playback Frame Advance 10 Press the â STILL/PAUSE button in the still picture mode. • The disc is advanced by one frame each time the button is pressed. To Return to the Normal Play Press the û PLAY button. OPERATE DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE SUBTITLE ON/OFF SUBTITLE ANGLE AUDIO TITLE MENU RETURN ENTER REPEAT A B REPEAT Slow-Motion Play PROGRAM 11 Press the SLOW button on the remote control in the play mode or still mode.
DVD Playback Fast Forward 1 If you press the FWDè button on the remote control when a disc is playing, the image begins to fast forward at low speed. • On some discs, the fast forward playback is disabled. • Audio and subtitles are not played back. T 01C014 T 0 1 :23:45 1: On some discs, the chapter number and playback time are not displayed. When the display mode is AUTO, only è appears. OPERATE DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
DVD Playback Skip (Forward) • Skip (Forward): While you are playing a disc, this function jumps forward to the beginning of the next chapter and automatically starts playing that chapter. OPERATE • On discs or titles that do not have chapter settings, playback skips forward to the next title. • On some discs, the skip functions are disabled. • Playback skips forwards one chapter for each time the SKIPà button is pressed. When the last chapter is reached, playback returns to the start of the disc.
VCD (Video CD) and CD (Audio CD) Playback Preparations: To prepare for playing DVD discs, perform steps 1 to 4 in “Basic Play” (page 29). Playing Video CDs with Playback Control (PBC) • Pressing the û PLAY button begins PBC playback. Time display is not shown for some discs. • If you specify the track number to be played (with playback stopped) and press the û PLAY button, normal playback (not PBC playback) begins. 1 Press the ûPLAY button.
VCD (Video CD) and CD (Audio CD) Playback Fast Forward • Audio and subtitles are not played back (video CD). • Audio is not played back (audio CD). 1 While a disc is playing, press the FWDè button on the remote control. T16 57 1 :29 Not shown for video CDs with PBC recorded (most version 2.0 discs). Current track number Playback time Video CD fast forward image appears here. (No image is shown for audio CDs.
VCD (Video CD) and CD (Audio CD) Playback Skip (Forward) • Skip (forward): While you are playing a disc, this function jumps forward to the beginning of the next track and starts playing automatically. OPERATE • Moves to the NEXT position when VCDs (video CDs) are played in PBC mode. DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE SUBTITLE ON/OFF SUBTITLE ANGLE AUDIO TITLE MENU RETURN ENTER REPEAT 1 While a disc is playing, press the SKIPà button.
Continuing Playback from where you stopped (Continued Playback) • This function operates for audio CDs, video CDs and DVD discs. 1 Press the Ë STOP button to stop playback at the desired point. • Leave the disc in the DVD player. • The DVD player automatically stores the location at which the disc stopped. OPERATE 2 Press the RESUME button on the remote control. • Playback resumes from a point just before the location stored in step 1.
Direct Selection of Scenes DVD Discs OPERATE Selecting Scenes by Title Number (DVD) SETUP • This function only operates on DVD discs that have a title screen. (Example) Viewing title “2” 1 OPEN/ CLOSE DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE SUBTITLE ON/OFF SUBTITLE ANGLE AUDIO TITLE MENU RETURN ENTER TITLE Press the TITLE button on the remote control to show the title screen.
Direct Selection of Scenes Direct Skip Function (DVD) (VCD, CD) This function allows you to skip directly to the beginning of any title (track) or chapter while a disc is playing. • Press the MEMORY button on the remote control or the ûPLAY button within 10 seconds of pressing a number to select your title, chapter or track. Once 10 seconds has passed, your selection is automatically cancelled. OPERATE DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Direct Selection of Scenes 5 Using the number buttons (0 to 9) on the remote control, enter the desired chapter number. (If you enter three or more digits, the last three digits are displayed.) OPERATE (Example) Entering chapter 27. T 02C–27 T 0 6 DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Programmed Playback The three types of programmed playback provided by this DVD player are title programmed playback (DVD discs), chapter programmed playback (DVD discs) and track programmed playback (VCD/CD discs). • On some discs, the programmed playback is disabled. DVD Discs OPERATE DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Programmed Playback DVD Discs Chapter Programmed Playback (DVD) 1 Press the PROGRAM button on the remote control twice while the disc is stopped. (Press once for a title and twice for a chapter.) The chapter program settings screen appears. OPERATE DIMMER DISPLAY SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Programmed Playback VCD (video CDs) and CD (audio CDs) Track Programmed Playback (VCD, CD) 1 Press the PROGRAM button on the remote control while the disc is stopped. The track program settings screen appears. T R A C K P ROGR AM OPERATE DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Repeat Playback Repeat playback is disabled on some discs. OPERATE DVD Discs Chapter Repeat (DVD) 1 If you press the REPEAT button on the remote control while a disc is playing, the current chapter is played repeatedly. (On discs without chapters, the player repeats the current title.) DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Repeat Playback DVD Discs A-B Repeat (DVD) • A-B repeat: Repeats any specified section on the disc. 1 While you are playing a disc, press the A-B REPEAT button on the remote control when you reach the start of the section to be repeated. OPERATE DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Repeat Playback VCD (video CDs) and CD (audio CDs) OPERATE • The Disc Repeat function cannot be used on video CDs with PBC mode playback (most version 2.0 discs). Disc Repeat (VCD, CD) 1 DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.PICTURE SUBTITLE ON/OFF SUBTITLE ANGLE AUDIO TITLE MENU RETURN ENTER REPEAT If you press the REPEAT button on the remote control while a disc is playing, the disc currently playing is played repeatedly.
Angle Selection (DVD only) • This function can only be used for discs on which scenes shot from multiple angles have been recorded. OPERATE • Some DVD discs contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. (The recorded angles differ depending on the disc used.
Subtitle Selection (DVD only) SUBTITLE ON/OFF switch • Display of subtitles is limited to software on which DVD disc subtitles are recorded. Also, even if you are playing back a DVD disc on which subtitles are recorded, the subtitles are not displayed when you set the SUBTITLE ON/OFF button to the OFF mode. • This function can only be used for discs on which subtitles have been recorded in multiple languages. OPERATE DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Audio Selection DVD Discs • This function can only be used for discs on which the sound has been recorded in multiple formats. • On some discs, the sound is recorded in both Dolby Digital (5ch or 5.1ch) and Linear PCM. Use the procedure below to select the type of playback. 1 While a disc is playing, press the AUDIO button on the remote control to show the current audio format number.
New Digital Gamma Selection (DVD, VCD) • “Adaptive digital gamma” is the digital function for high picture quality which keeps the bright part of picture as it is during AUTO mode, and which automatically detects and compensates for dark and difficult-to-see parts, making them brighter and easy to see, richly reproducing the original high picture quality provided by DVD. Also, in the ON mode, you can set this function to the desired level manually.
New Digital Super Picture Selection (DVD, VCD) • DIGITAL S.PICTURE is a digital image quality enhancement function that gives a clearer image by sharpening the details and outlines in the image and reducing the amount of picture noise. The DIGITAL S.PICTURE setting can be varied as desired. • To see more detail in very intricate images, set this setting to SP . • To reduce visual noise and obtain a clearer picture when you are NR .
VIRTUAL Surround (Audio) Selection (DVD only) • This function allows you to enjoy a “surround sound” effect when you are using an analogue connection (using AUDIO OUT “FRONT” on the DVD player) to 2-channel audio equipment (TV, etc.). • Virtual Surround operates when you are playing DVD discs recorded in Dolby Digital sound or Dolby Pro Logic sound. OPERATE Preparations: DIMMER DISPLAY OPEN/ CLOSE SETUP VIRTUAL DIGITAL DIGITAL GAMMA S.
Language Code List on Menu Screen Code Language Name Code Language Name Code Language Name Code Language Name Afar FY Frisian MG Malagasy SL Slovenian AB Abkhazian GA Irish MI Maori SM Samoan AF Afrikaans GB Scots Gaelic MK Macedonian SN Shona AM Ameharic GL Galician ML Malayalam SO Somali AR Arabic GN Guarani MN Mongolian SQ Albanian AS Assamese GU Gujarati MO Moldavian SR Serbian AY Aymara HA Hausa MR Marathi SS Siswat AZ Azerbaijani HI Hin
Definition of Terms Angle: Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc,). With such discs, the ANGLE button can be used to view the scene from different angles. Chapter Number: These numbers are recorded on DVD discs.
Specifications Signal System Video output S video output Component colour output Audio output Digital audio I/F Audio output Headphone output Video signal horizontal resolution S/N ratio Audio signal frequency characteristics S/N ratio Dynamic range Total harmonic distortion ratio Operating temperature Storage temperature Power supply Power consumption Dimensions Weight NTSC/PAL Output connector: Phono/21-pin Euro-SCART Output level: 1 Vp-p (75Ω) Y output level: 1 Vp-p (75Ω) C output level: 0.
Before Calling Service The following conditions do not always denote trouble. Therefore, perform the checks described below before calling for service. If the problem cannot be corrected by the use of this guide, remove the mains plugs from the wall socket, and contact the dealer or supplier from whom the unit was purchased in order to obtain service. Where this is not possible please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 0990 274277 during office hour.
Disc Handling and Maintenance Handling Precautions • Hold the disc by the edges so the surface will not be soiled with fingerprints. ( A ) Fingerprints, dirt and scratches can cause skipping and distortion. • Do not write on the label side with a ball-point pen or other writing utensils. • Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. • Be careful not to drop or bend the disc. • Do not install more than 1 disc on the disc tray.
Memo Downloaded From Disc-Player.
Memo Downloaded From Disc-Player.
Memo Downloaded From Disc-Player.
SHARP CORPORATION Osaka, Japan SHARP ELECTRONICS (U.K.) LTD. Sharp House, Thorp Road, Newton Heath Manchester M40 5BE Downloaded From Disc-Player.
