Unit installation

( )
(1)
( )
4 Insert the unit into the bracket, fasten the M4×6 screw to the fireproofing
board available at the back of the dashboard, and use 4 pieces of M2×2
screw to lock the assemble bars and the mounting bracket in position.
Note:
According to the depth of the opening, use different length of assemble
be
bar accordingly. If the opening is too shallow, the monitor may
extended out 10mm from the dashboard.
Method B
Insert this unit directly to the opening of the dashboard.
2 Place M4×3, M5×5 cylindrical screw or M5×5 cone shaped screw
through the holes of the mounting frame located inside the opening
to holes of the unit and fasten the screws to left & right.
Dashboard
Rubber Sheath
M5 X 24
Long Assemble Bar
M2 X 2
Mounting Bracket
（Picture 2）
Installation and uninstall
33
1
1
Dashboard
M5 X 5
Mounting Frame