Specifications

GB
30
SETTING UP
Setup
AUDIO SETUP Setting
COMPRESSION ............ Use this setting for increasing the average
volume of Dolby Digital audio when playing a
DVD.
DIGITAL/MPEG ...... Use these settings for specifying the type of
digital output when playing a disc recorded
using Dolby Digital/MPEG Audio.
Setting the COMPRESSION
(Dolby Digital output level)
When Dolby Digital is used to record the audio on a DVD, the average
overall volume level of the audio is relatively lower than that produced
by a VIDEO CD/Audio CD. This is to provide the widest possible
dynamic range. To counteract this, your Player automatically raises the
overall average volume level of a disc recorded using Dolby Digital to a
level that is similar to that of a VIDEO CD/Audio CD.
• OFF.............. Audio level recorded on disc is played back without
modification.
• ON ............... Dolby Digital average audio level is increased so it
sounds similar to that of a VIDEO CD/Audio CD.
1 Press SETUP to display the SETUP screen.
2 Use ' or " to select the “ AUDIO SETUP”.
AUDIO SETUP
COMPRESSION: OFF
MPEG:
DIGITAL: BITSTREAM
BITSTREAM
COMPRESSION:
OFF
COMPRESSION:
ON
• Low audio level
VIDEO CDs
Audio CDs
•
Audio level the same
as Audio CD, etc.
MC
OPEN/
CLOSE
OPERATE
SETUP
ZOOM
ON
SCREEN
AUDIO
TITLE
MENU
VIRTUAL
FUNCTION
CONTROL
SUBTITLE ANGLE
RETURN
REV FWD
ENTER
REPEAT
A B REPEAT
PROGRAM
DIRECTCLEAR MEMORY
PAUSE
RESUME
SLOW
F.ADV SLOW
STILL
DVD VIDEO PLAYER
PLAY
STOP
DISPLAY DIMMER
SKIP SKIP
DVDs
Dolby Digital audio
Downloaded from www.Manualslib.com manuals search engine
Downloaded From DvDPlayer-Manual.com Sharp Manuals