Service manual

22
XV-Z90U
DT-200
22 Automatic sync
operation
1. Receive the phase checking pattern
signal.
No. Adjustment Items Adjustment Conditions Adjustment Procedures
1. Confirm that Clock, Phase, H-POS
and V-POS can be automatically
adjusted in the VGA/S-VGA/XGA
mode.
23 Factory settings 1. Make the following settings.
21 Confirmation of
thermistor opera-
tion
1. Confirm that the temperature is dis-
played.
1. Heat the thermistor by dryer.
Model Process Remote controller
adjustment settings
XV-Z90U SS4 "Factory Setting 4"
DT-200 SS5 "Factory Setting 5"