Service manual

ManualsBrandsSharp ManualsProjector AccessoriesDT-100

DT-100

SPECIFICATIONS

Projector

DT-100

NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/

DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50

Single Chip Digital Micromirror Device

(DMD

) by Texas Instruments

Panel size:

0.53

, 1chipDMD

No. of dots:

409,920 dots (854 [H] 480 [V])

1–1.15 zoom lens, F2.4–2.6, f = 19.0–21.9 mm

275 W DC lamp

15-pin mini D-sub connector

Y: 1.0 Vp-p, sync negative, 75 terminated

: 0.7 Vp-p, 75 terminated

520 TV lines (DTV720P)

15-pin mini D-sub connector

RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 terminated

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)

VERTICAL SYNC. SIGNAL: Same as above

4-pin mini DIN connector

Y (luminance signal): 1.0 Vp-p, sync negative, 75 terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 terminated

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75

terminated

45–85 Hz

15–70 kHz

12–108 MHz

9-pin mini DIN connector

ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 k (stereo)

ø3.5 mm minijack: 0.5 Vrms, less than 2.2 k

4 cm 2.85 cm oval 1

AC 100–240 V

3.6 A

50/60 Hz

350 W (Lamp Setting “Bright”)/

305 W (Lamp Setting “Eco + Quiet”)

with AC 100 V

330 W (Lamp Setting “Bright”)/

285 W (Lamp Setting “Eco + Quiet”)

with AC 240 V

4 W (AC 100 V) – 5 W (AC 240 V)

1,315 BTU/hour (Lamp Setting “Bright”)/

1,145 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V

1,240 BTU/hour (Lamp Setting “Bright”)/

1,070 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V

41°F to 95°F (+5°C to +35°C)

–4°F to 140°F (–20°C to +60°C)

Plastic

38 kHz

" 4

" 11

" (315 (W) 109 (H) 280 (D) mm) (main body only)

" 4

" 11

" (315 (W) 120 (H) 294 (D) mm) (including adjust-

ment foot and projecting parts)

8.6 lbs. (3.9 kg)

Remote control, Power cord for U.S. and Canada,

3 RCA to 15-pin D-sub adaptor, Operation manual

Product type

Model

Video system

Display method

DMD panel

Lens

Projection lamp

Component input signal

(INPUT1/2)

Horizontal resolution

Computer RGB input

(INPUT 1/2)/output

(OUTPUT) signal

S-video input signal

(INPUT 3)

Video input signal

(INPUT 4)

Vertical frequency

Horizontal frequency

Pixel clock

RS-232C terminal

Audio input signal

Audio output signal

(AUDIO OUTPUT 1-4)

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Replacement parts

As a part of policy of continuous improvement, SHARP reserves the right to make design and

specification changes for product improvement without prior notice. The performance specifica-

tion figures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

××

Ω