User's Manual

20
BEFORE OPERATING
• Before operating your new microwave oven make
sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these proce-
dures:
1. Plug in the oven. Close the door. The oven display will
show
.
2. Touch the Stop/Clear pad. : will appear.
3. Set clock.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the display.
Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show after the power is reinstated. If this
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
Stop/Clear pad and reset the clock for the correct
time of day.
NOTE: Your oven can be programmed with the door
open except for START/Minute Plus and Popcorn.
ENJOY YOUR OVEN PRESS CLEAR AND
PRESS CLOCK
3
Touch Timer/Clock pad again.
Timer
Clock
12:30
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
STOP/CLEAR
PROCEDURE DISPLAY
1
2
Touch Timer/Clock pad
and number 2.
Enter the correct time of
day by touching the
numbers in sequence.
Timer
Clock
TO SET
CLOCK
PRESS 2
12:30
R-2120J manual#382 4/15/04, 11:17 AM20