Specifications

E-6
2009 September 25
DK-E7P_A6_EN_SCEE.mif
DK-E7P
ENGLISH
Basic Operation
General control
 To turn the power on
Press the ON/STAND-BY button to turn the power on. The
POWER and ESOUND indicator will turn on.
Note:
This unit consumes low current during stand-by mode. However,
please remove the batteries if the unit will not be used for a long
period of time.
 Volume control
Press the VOL (+ or –) button to increase or decrease the
volume.
POWER indicator will be blinking when the volume reaches
maximum or minimum level.
 ESOUND control
When ON/STAND-BY button is pressed, the ESOUND indicator
turns yellowish orange. You are now in the ESOUND mode,
where low bass and high frequency are automatically adjusted
according to the volume input.
To turn off ESOUND, press the ESOUND (TV OUT) button. The
ESOUND indicator will go off.
 Auto Power off function
If no iPod or iPhone is docked and there is no audio cable
connected to AUX IN terminal, the unit will enter the power
stand-by mode after 5 minutes of inactivity.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode. The POWER indicator will turn off.
2.1
STEREO SPEAKER
BUILT-IN SUBWOOFER
ON/S
T
AND-B
Y
VOL
–
VOL
+
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals