Operating instructions

14
2009 April 1
DK-AP7P_A6 02-15_US.fm
DK-AP7P
References
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorized SHARP dealer or service center.
 General
 iPod and iPhone
 Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1
hour) before operating the unit.
 If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation, unplug
and plug in the unit, and then turn the power on.
 Before transporting the unit
Undock the iPod or iPhone and close the unit. The unit will
automatically enter stand-by mode.
CAUTION: Carrying the unit with iPod or iPhone docked might
damage both systems.
Symptom Possible cause
z When a button is
pressed, the unit does
not respond.
z Set the unit to the power
stand-by mode and then
turn it back on.
z No sound is heard. z Is the volume level set to
minimum?
Symptom Possible cause
z No sound is produced.
No image appears on the
TV/monitor.
z The iPod or iPhone is not
playing.
z The iPod or iPhone is not
properly connected to the
unit.
z Is the AC/DC adaptor of the
unit plugged in?
z The video cable is not
properly connected.
z The TV/monitor’s input
selection is not properly set.
z iPod or iPhone will not
charge.
z The iPod or iPhone is not
making full contact with the
connector.
z The main unit is using
batteries as power supply.
z Using 3
rd
generation iPod.