Operating instructions
Notes:
• If steps 1 - 6 above are done using the remote control, press the
ALARM ON/OFF button on main unit to activate the alarm.
• To switch off illumination and display
in
demonstration mode,
press the E SOUND/DEMO button.
Changing
alarm
source
only
• After source
is
selected
in
step
2,
press and hold the
ALARM
button.
• If TUNER
is
selected, press and hold the ALARM button after preset
station is selected
in
step
3.
• The time and volume will
be
automatically set
to
the
previous setting.
Activating
and deactivating
the
alarm
1 Press the ALARM ON/OFF button on main unit to activate and
deactivate the alarm function. When activated:
• During power on, "ALARM" will appear.
• During stand-by mode, ALARM indicator will light up.
2 Set to CLOCK function, stand-by mode or demonstration mode.
Checking
the
alarm
setting
• Press the ALARM button.
• The selected source or buzzer type will blink.
• The unit will display the alarm time for 3 seconds.
• During stand-by mode, the display will remain for 6 seconds.
Example: The time is 10:00 AM and iPod function is selected.
Notes:
• Buzzer
sound
will
be
output
from
right
speaker only.
• Alarm will not activate during power on mode.
• When iPod is selected
in
step
2,
if iPod unit is not detected during
alarm activation, source will automatically change to BUZZER
1.
• When CD is selected
in
step
2,
if disc is not detected during
alarm activation, source will automatically change to BUZZER
1.
• When performing alarm using another unit connected to AUX,
select AUX
in
step
2.
The unit will turn on and enter the clock
function automatically, however, the connected unit to AUX will
not turn on or off.
• When the entire preset memory is erased (page 25), source will
automatically change to BUZZER 1 even if TUNER
is
pre-selected
(step 2).
1 Press and
hold
the
ALARM
button
for
more
than
2
seconds.
2 Press the
l+1li
or
~
button
to
select source
or
buzzer.
1 Check that the clock is set to the correct time (refer page 14).
If it is not set, you cannot use the alarm function.
2 For iPod playback: Insert iPod to the unit (refer page 16).
3 For TUNER: Set preset memory (refer page 25).
4 For CD playback: Insert disc to the unit (refer page 19).
t
Press
the
ALARM
button.
4 Press the
l+1li
or
~
button
to
adjust the hour.
Press
the
ALARM
button.
3
If
TUNER
is
selected,
press
the
l+1li
or
~
button
to
select
a
preset
station.
Press
the
ALARM
button.
5 Press the
l+1li
or
~
button
to
adjust the minute.
Press
the
ALARM
button.
6 If other than BUZZER
is
selected in step
2,
press the
l+1li
or
~
or
VOL
(+
or
-)
button
to
select volume.
Press
the
ALARM
button.
Before
setting
the
alarm:
Setting
the
alarm
content
D~~~JgK
Alarm and sleep operation
• Alarm
The unit turns on and play desired source (iPod, CD, TUNER, AUX)
or Buzzer sound for 30 minutes.