Operating instructions
DK-A10
Listening
to
the
radio
DK-A10BK
TUNER
ON/
STAND-BY
..:..,
~I
~_ee§
GBe8
eeee
TUNING
@0e§
00-~~0
~
Auto power on function:
When you press any of the following buttons, the unit turns on.
• TUNER button (main unit): The unit turns on and the TUNER
function is activated.
•
~
/11
button (main unit and remote control): The unit turns on and
playback of the last function starts (iPod, CD, TUNER, AUX).
24
• Tuning
1 Press the ON/STAND-BY button
to
turn the power on.
2 Press the TUNER button on main unit
or
FUNCTION
button
on remote control repeatedly to select the desired
frequency band
(FM
or
AM).
3 Press the TUNING (...
or
...
) button on the remote
control
to
tune in
to
the desired station.
Manual tuning:
Press the TUNING (
...
or
...
) button
as
many times
as
required
to tune
in
to the desired station.
Auto tuning:
When the TUNING (
...
or
...
) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
• When radio interference occurs, auto scan tuning may stop
automatically at that point.
• Auto scan tuning will skip weak signal stations.
•
To
stop the auto tuning, press the TUNING (
...
or .A) button
again.
To receive an
FM
stereo transmission:
Press the TUNER button (main unit) or FUNCTION button (remote
control) to select stereo mode and "ST" indicator will
be
display.
•
"en"
will appear when an
FM
broadcast
is
in
stereo.
• If the
FM
reception is weak, press the TUNER button (main unit)
or FUNCTION button (remote control) to extinguish the "ST"
indicator. The reception changes to monaural, and the sound
becomes clearer.
FM
stereo mode indicator
FM
stereo receiving indicator