Operating instructions
D~~~JgK
Setting the
clock
Press
the
~
or
~
button
to
adjust
the
hour
and then
press the CLOCK button.
Press the
~
or
~
button
to
select 12-hour
or
24-hour
display
and then press the CLOCK button.
Press the
~
or
~
button once to advance the time by
1 minute. Hold it down to change the time
in
5-minutes interval.
You can press the CLEAR button to abort clock setting.
To
confirm
the
time
display:
[When the unit is
in
the stand-by mode or demonstration mode.]
Press the CLOCK button to enter the clock function.
[When the power is on]
Press DISPLAY button on the remote control to toggle between the
function information and clock display.
4 Press
the
~
or
~
button
to
adjust
the minutes and then
press
the
CLOCK button.
Notes:
• The clock will continue counting for 8 hours should there be a
power failure or the AC power cord becomes disconnected.
• The "CLOCK ADJ" will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit after 8 hours. If incorrect, readjust the clock
as follows.
To readjust
the
clock:
Perform "Setting the clock" from step 1 to step
4.
To change
the
12-hour
or
24-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 30 for details.]
2 Perform "Setting the clock" from step 1.
Summer time:
The Summer Time switch is located
on
the rear of the unit.
1 Slide the Summer Time switch to
+1 to advance
the time 1 hour.
~
indicator will appear.
SU~ERh
_I
2 Slide the Summer Time switch to
-1
to turn the
TIME
I I
clock back 1 hour.
+1
-1
SHARP
-
ON/
t:::\
STAND-BY r
~et@
v
-
1~~~8
8
@08@
I
~e~
e
The 12-hour display will appear.
(12:00
AM
-
11
:59 PM)
The 12-hour display will appear.
(0:00
AM
-
11
:59 PM)
The 24-hour display will appear.
(0:00 - 23:59)
"12:00 AM"
~
~
"0:00AM"
~
~
I I I
Press the
~
or
~
button once to advance the time by 1 hour.
Hold it down to advance continuously.
In
this example, the clock is set for the 12-hour (12:00 AM) display.
Press the CLOCK button
for
more than 2 seconds.
14