Specifications

20
3 Enter the port number for the search in "Search Port".
• Be sure to enter the same number as the number for the search set up on the devices or the network converter.
• The default setting is 5006.
• The setting range is from 1025 to 65535.
4 Enter the range of port numbers for data communication in "Data Port".
• Use this setting when you want to restrict the available data ports on the PC.
• The default setting is 1025 to 65535.
• The setting range is from 1025 to 65535.
5 Click the "Apply" button.
6 Click the "OK" button to finish the settings.
To Specify Auto Refresh Settings for the Device Information List
By pre-specifying Auto Refresh for the device information list and the refresh interval, device information is
automatically collected at the specified timing to refresh the device information list.
1 Select "Setting (P)" from the "Option (O)" menu and click the "General" tab in the "Setting" dialog box.
The "Setting" dialog box appears. (The "General" tab is selected.)
2 Place a checkmark in the "Auto Refresh" checkbox and drag the slider to a new position to
set the refresh interval.
• Auto Refresh will not be performed when the checkmark is removed.
• The refresh interval can be set within the range of 60 to 180 seconds (in one second increments).
3 Click the "Apply" button.
4 Click the "OK" button to finish the settings.
• We recommend to set a shorter time for Auto Logout than Auto Refresh, when the device has an Auto Logout
function. This enables an earlier update following the recovery from network trouble, etc.
Disp_Manager_E_p12-23.p65 08.4.28, 5:39 PM20