User manual

Apps
53
■ Uninstalling apps
1
In the Google Play screen, [s]/[My apps]
2
Select an app to uninstall
3
[UNINSTALL]/[OK]
Osaifu-Keitai is a function for using "Osaifu-Keitai compatible
services" which enable you to pay, use the handset as
coupons, etc. by simply holding it over scanning devices at
stores etc. and using "Kazashite-Link compatible services"
which enable you to access information by holding the handset
over home electric appliances, smart posters, etc.
You can save electronic money, points, etc. on the IC card or
docomo nano UIM card.
In addition, you can deposit electronic money, check the
balance and the remaining points, etc. while you can lock
Osaifu-Keitai functions in case of theft or loss.
For details on Osaifu-Keitai, refer to the DOCOMO website.
※To use Osaifu-Keitai compatible services, settings are necessary
on a website or an app.
Using Osaifu-Keitai compatible handset
The handset malfunctions may cause data on the IC card
*1
, data
on the docomo nano UIM card
*2
to be lost or changed (Note that
as a rule, you will be asked to delete data when leaving your
handset for repairs etc., since we cannot keep your handset with
such data still remaining in it). For the service such as a reissue,
restoration, temporary keeping or transference of the data,
contact a provider of the Osaifu-Keitai compatible service you
use. Be sure to use the Osaifu-Keitai compatible service including
a backup service for important data.
To use the Osaifu-Keitai compatible service by using data on the
docomo nano UIM card, you need to install an app from a provider
of the Osaifu-Keitai compatible service and set it even if you
continue to use same docomo nano UIM card as before model
change.
DOCOMO shall not be liable for any loss or change of data on the
IC card, data on the docomo nano UIM card or other damages
related to Osaifu-Keitai compatible services caused by any
reason such as malfunctions and model changes.
When the handset is stolen or lost, immediately contact a provider
of the Osaifu-Keitai compatible service you use for handling
methods.
*1 The data saved on the built-in IC card of the Osaifu-Keitai
compatible handset
*2 The data saved on the docomo nano UIM card
Using "Osaifu-Keitai compatible services"
To use Osaifu-Keitai compatible services, download the
Osaifu-Keitai compatible app from Osaifu-Keitai compatible
websites and make the setting. Some services do not require the
download of the Osaifu-Keitai compatible app.
1
In the home screen, display the APPS Sheet/
[Osaifu-Keitai]
: If the initial settings are not completed, the initial settings
screen appears. Follow the instructions on the screen and
operate.
2
Select a service
: Make settings on the website of the service or after
downloading the app compatible with the service.
3
Hold the a mark of the handset over the
scanning device
Using "Kazashite-Link compatible services"
Enable [Reader/Writer, P2P] in advance (n P.54 "NFC/Osaifu-
Keitai settings").
1
Hold the a mark of the handset over a device
into which an NFC module is built, smart poster,
etc.
Precautions about holding over the other
device
Pay attention to the following points when holding the a mark
over the other device such as a scanning device or device into
which an NFC module is built.
 Do not let the handset strongly clashed with the other device
but slowly bring the handset close to the other device when
holding the a mark over it.
 Hold the a mark over the center of the other device and in
parallel with it. If the other device does not recognize the built-
in IC card even when you do so, slightly move the handset
away from the other device or move the handset around.
Osaifu-Keitai
You cannot use Osaifu-Keitai compatible services in the
following situations. However, you can pay by holding the
handset over a scanning device.
 In Airplane mode
 When you are charging the handset, connecting Micro USB
Cable 01 (sold separately) to it or connecting an earphone/
microphone to it while the docomo nano UIM card is not
inserted/when the handset has never received radio wave
Osaifu-Keitai compatible services are available even if you
cannot unlock the PIN code of the docomo nano UIM card or the
PIN code is locked.
If you have not subscribed to sp-mode, you may not be able to
use some functions of an Osaifu-Keitai compatible service.
The handset can communicate with scanning devices without
activating Osaifu-Keitai compatible app.
Communicating with the scanning device is available even if you
turn the power off. However, you may not be able to use it if the
power remains turned off for a long time or the battery level is
insufficient.
Some Osaifu-Keitai compatible services are not available during
Emergency mode (nP.20 "Emergency mode").
Depending on the installed Osaifu-Keitai compatible app or
app's settings, Osaifu-Keitai compatible services may not be
used by holding the handset over the scanning device while the
Screen lock is set, the display is turned off or power is turned off.
mark