User Manual

6
Basic Operation (continued)
(2) Changing the Channels
Changing channels using the CHANNEL SELECT buttons on the remote control
To handle the increasing number of channels available, this TV set allows you to select up to 100
positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow
the procedure shown below to select channels.
To select a one-digit channel (e.g.,
Channel 5):
(1) Press the
5
button.
(2) If “5-” is indicated and the picture
does not change, press the
button to switch over to the 1-digit
select mode and press the
5
button
again.
When selecting the channel using the CHANNEL UP (CH) or DOWN (CH) button on the TV set, AV
mode is positioned as follows:
Channel up: 1 2 3 . . . 98 99 AV1 AV2 0 1 2 3 . . .
Channel down: 3 2 1 0 AV2 AV1 99 98 . . . 3 2 1 . . .
Skipped channels will not be displayed when selecting the channel using the CHANNEL UP (CH) or
DOWN (CH) button.
PAL
B/G
5
To select a two-digit channel (e.g.,
Channel 15):
(1) Press the
button to set the 2-digit
select mode.
(2) Press the
1
button.
(3) Press the
5
button.
PAL
B/G
15
1-
--
Changing channels with the CHANNEL UP (CH) or DOWN (CH) button on the remote control
Press the CHANNEL UP (CH) button and the channels change in the order shown below:
1 2 3 98 99 0 123
Press the CHANNEL DOWN (CH) button and the channels change in the order shown below:
3 2 1 0 99 98 3 2 1
In this mode entering a 0 first will
enable selection of single digit
channels e.g. 07.
Complete this procedure within 5
seconds, otherwise the selection
will not be made.
A
VIDEO 1
VIDEO 2
CH
CH
456
78
0
9
BCD
12
A
VIDEO 1
VIDEO 2
CH
CH
3
456
78
0
9
BCD
(3) Adjusting the Volume
Press the VOLUME UP ( ) or
DOWN (
) button to adjust the
volume.
The number of oval blocks “ô
indicates volume level.
The display disappears
approximately 3 seconds after the
volume adjustment has been
completed.
(TV set)
VOLUME 15
NORMAL
MENU
A
CH
CH
BCD